Huawei SmartLogger2000 Quick Manual page 9

1. Determine mounting holes based on the hole positions in the mounting ears, and mark
the mounting holes using a marker.
Unit: mm
NOTICE
If you need to use a ladder to install the device on a high position, take measures to protect
yourself from falling down.
2. Drill holes by using a hammer drill and install expansion sleeves, washers, and tapping screws.
Unit: mm
3. Put the tapping screws through the SmartLogger mounting ears and washers into the mounting
holes in the wall.
Screw assembly for wall-mounting:
(1) ST3.5 tapping screw
(2) Washer
(3) Expansion sleeve
8