Ordering For Accessories; Gps Antenna And Mounting Details; Interface Converter (For Remote End Data Communication); Test Switch - ABB REC670 Product Manual

Bay control REC670 2.2
Product version: 2.2.1

26. Ordering for Accessories

Accessories

GPS antenna and mounting details

GPS antenna, including mounting kits
Cable for antenna, 20 m (Appx. 65 ft)
Cable for antenna, 40 m (Appx. 131 ft)

Interface converter (for remote end data communication)

External interface converter from C37.94 (64kbps) to G703
External interface converter from C37.94 (64kbps/2Mbps) to G703.E1

Test switch

The test system COMBITEST intended for use with the IEDs
is described in 1MRK 512 001-BEN and 1MRK 001024-CA.
Please refer to the website:
for detailed information.
Due to the high flexibility of our product and the wide variety
of applications possible the test switches needs to be
selected for each specific application.
Select your suitable test switch base on the available
contacts arrangements shown in the reference
documentation.
However our proposals for suitable variants are;
Single breaker/Single or Three Phase trip with internal neutral
on current circuits (ordering number RK926 315-AK).
Single breaker/Single or Three Phase trip with external neutral
on current circuits (ordering number RK926 315-AC).
Protection cover
Protective cover for rear side of RHGS6, 6U, 1/4 x 19"
Protective cover for rear side of terminal, 6U, 1/2 x 19"
Protective cover for rear side of terminal, 6U, 3/4 x 19"
Protective cover for rear side of terminal, 6U, 1/1 x 19"
ABB
SEMOD111888-5 v12
www.abb.com/protection-control
Quantity:
Quantity:
Quantity:
Quantity:
Quantity:
Multi-breaker/Single or Three Phase trip with internal neutral
on current circuits (ordering number RK926 315-BE).
Multi-breaker/Single or Three Phase trip with external neutral
on current circuit (ordering number RK926 315-BV).
The normally open "In test mode" contact 29-30 on the RTXP
test switches should be connected to the input of the test
function block to allow activation of functions individually
during testing.
Test switches type RTXP 24 is ordered separately. Please
refer to Section Related documents
corresponding documents.
RHGS 6 Case or RHGS 12 Case with mounted RTXP 24 and
the on/off switch for dc-supply are ordered separately. Please
refer to Section Related documents
corresponding documents.
Quantity:
Quantity:
Quantity:
Quantity:
1MRK 511 404-BEN A
IP15151-1 v1
M12374-3 v5
1MRK 001 640-AA
1MRK 001 665-AA
1MRK 001 665-BA
M16668-3 v9
1MRK 002 245-AA
1 2
1MRK 002 245-BA
1 2
for references to
for references to
M15040-3 v6
1MRK 002 420-AE
1MRK 002 420-TA
1MRK 002 420-SA
1MRK 002 420-RA
133