1. Manuals
  2. Brands
  3. ABB Manuals
  4. Control Systems
  5. Relion 670 series
  6. Product manual

ABB RELION 670 Series Product Manual

Hide thumbs Also See for RELION 670 Series:
Table of Contents

Advertisement

Quick Links

Download this manual
—
R E L I O N ® 670 SERIES
Bay control REC670
Version 2.1
Product guide

Advertisement

Table of Contents
loading

Related Manuals for ABB RELION 670 Series

Summary of Contents for ABB RELION 670 Series

  • Page 1 — R E L I O N ® 670 SERIES Bay control REC670 Version 2.1 Product guide...

  • Page 2: Table Of Contents

    Disclaimer The information in this document is subject to change without notice and should not be construed as a commitment by ABB. ABB assumes no responsibility for any errors that may appear in this document. Drawings and diagrams are not binding.

  • Page 3: Application

    1MRK 511 361-BEN D Bay control REC670 2.1 IEC Issued: March 2019 Revision: D Disturbance recording and fault locator are available to allow independent post-fault analysis after primary 1. Application disturbances in case of a failure in the protection M13637-3 v12 The IED is used for the control, protection and system.
  • Page 4 1MRK 511 361-BEN D Bay control REC670 2.1 IEC need to be applied as required for each application. The interlocking modules and the number of apparatuses to main differences between the packages above are the control.
  • Page 5 1MRK 511 361-BEN D Bay control REC670 2.1 IEC Description of configuration A30 M15200-3 v7 REC670 A30 – Double busbar in single breaker arrangement 12AI (6I + 6U) Control Control Control S CILO S CSWI S XSWI Control Control Control S CILO S CSWI S XSWI...
  • Page 6 1MRK 511 361-BEN D Bay control REC670 2.1 IEC Description of configuration A31 GUID-3E17DBD1-28EB-43DF-B6F3-BAFECB338A10 v2 REC670 A31 – Bus Coupler Bay arrangement 12AI (6I + 6U) Control Control Control S CILO S CSWI S XSWI QC11 QC21 QB20 Control Control Control S CILO S CSWI...
  • Page 7 1MRK 511 361-BEN D Bay control REC670 2.1 IEC Description of configuration B30 M15200-12 v5 REC670 B30 - Double breaker arrangement 12AI (6I + 6U) Control Control Control S CILO S CSWI S XSWI WA2_VT Control Control Control SC/VC S CILO S CSWI S XSWI VN MMXU...
  • Page 8 1MRK 511 361-BEN D Bay control REC670 2.1 IEC Description of configuration C30 M15200-24 v5 REC670C30 – Complete one-and a half breaker diameter arrangement 24AI (6I + 6U, 6I+6U) Control Control Control S CILO S CSWI S XSWI WA1_VT WA1_QA1 Control Control Control...

  • Page 9: Available Functions

    1MRK 511 361-BEN D Bay control REC670 2.1 IEC 2. Available functions Main protection functions GUID-66BAAD98-851D-4AAC-B386-B38B57718BD2 v12.1.1 Table 1. Example of quantities = number of basic instances = option quantities 3-A03 = optional function included in packages A03 (refer to ordering details) IEC 61850 ANSI Function description...

  • Page 10: Current Protection

    1MRK 511 361-BEN D Bay control REC670 2.1 IEC Back-up protection functions GUID-A8D0852F-807F-4442-8730-E44808E194F0 v10.1.1 IEC 61850 ANSI Function description Bay control REC670 (Customized) Current protection PHPIOC Instantaneous phase overcurrent 1-C51 1-C51 2-C52 2-C53 protection OC4PTOC Four step phase overcurrent 1-C51 1-C51 2-C52 2-C53...

  • Page 11: Multipurpose Protection

    1MRK 511 361-BEN D Bay control REC670 2.1 IEC IEC 61850 ANSI Function description Bay control REC670 (Customized) SAPTUF Underfrequency protection 6-E01 6-E01 6-E01 6-E01 SAPTOF Overfrequency protection 6-E01 6-E01 6-E01 6-E01 SAPFRC Rate-of-change frequency protection 6-E01 6-E01 6-E01 6-E01 FTAQFVR Frequency time accumulation 0-12...
  • Page 12 1MRK 511 361-BEN D Bay control REC670 2.1 IEC Control and monitoring functions GUID-E3777F16-0B76-4157-A3BF-0B6B978863DE v12.1.1 IEC 61850 ANSI Function description Bay control REC670 Control SESRSYN Synchrocheck, energizing check and synchronizing 0-6, 0-2 SMBRREC Autorecloser 0-6, 0-4 1-H04 1-H04 2-H05 3-H06 APC10 Apparatus control for single bay, max 10 apparatuses (1CB) incl.

  • Page 13: Secondary System Supervision

    1MRK 511 361-BEN D Bay control REC670 2.1 IEC IEC 61850 ANSI Function description Bay control REC670 Secondary system supervision CCSSPVC Current circuit supervision FUFSPVC Fuse failure supervision VDSPVC Fuse failure supervision based on voltage difference 1-G03 1-G03 1-G03 1-G03 Logic SMPPTRC Tripping logic...

  • Page 14: Monitoring

    1MRK 511 361-BEN D Bay control REC670 2.1 IEC IEC 61850 ANSI Function description Bay control REC670 INTCOMP Comparator for integer inputs REALCOMP Comparator for real inputs Monitoring CVMMXN, Measurements VMMXU, CMSQI, VMSQI, VNMMXU CMMXU Measurements AISVBAS Function block for service value presentation of secondary analog inputs EVENT Event function...
  • Page 15 1MRK 511 361-BEN D Bay control REC670 2.1 IEC Table 2. Total number of instances for basic configurable logic blocks Basic configurable logic block Total number of instances GATE PULSETIMER RSMEMORY SRMEMORY TIMERSET Table 3. Total number of instances for configurable logic blocks Q/T Configurable logic blocks Q/T Total number of instances ANDQT...
  • Page 16 1MRK 511 361-BEN D Bay control REC670 2.1 IEC Communication GUID-5F144B53-B9A7-4173-80CF-CD4C84579CB5 v12.1.1 IEC 61850 ANSI Function description Bay control REC670 (Customized) Station communication LONSPA, SPA SPA communication protocol LON communication protocol HORZCOMM Network variables via LON PROTOCOL Operation selection between SPA and IEC 60870-5-103 for SLM RS485PROT Operation selection for RS485...
  • Page 17 1MRK 511 361-BEN D Bay control REC670 2.1 IEC IEC 61850 ANSI Function description Bay control REC670 (Customized) MULTICMDRCV, Multiple command and transmit 60/10 60/10 60/10 60/10 60/10 MULTICMDSND FRONT, LANABI, Ethernet configuration of links LANAB, LANCDI, LANCD GATEWAY Ethernet configuration of link one OPTICAL103 IEC 60870-5-103 Optical serial communication...
  • Page 18 1MRK 511 361-BEN D Bay control REC670 2.1 IEC IEC 61850 ANSI Function description Bay control REC670 (Customized) ZCLCPSCH Local acceleration logic 1-K01 1-K01 1-K01 1-K01 ECPSCH Scheme communication logic for residual 1-C51 1-C51 1-C52 1-C53 overcurrent protection ECRWPSCH Current reversal and weak-end infeed logic 1-C51 1-C51 1-C52...

  • Page 19: Basic Ied Functions

    1MRK 511 361-BEN D Bay control REC670 2.1 IEC Basic IED functions GUID-C8F0E5D2-E305-4184-9627-F6B5864216CA v9 Table 5. Basic IED functions IEC 61850 or function Description name INTERRSIG SELFSUPEVLST Self supervision with internal event list TIMESYNCHGEN Time synchronization module BININPUT, SYNCHCAN, Time synchronization SYNCHGPS, SYNCHCMPPS, SYNCHLON,...
  • Page 20 1MRK 511 361-BEN D Bay control REC670 2.1 IEC Table 5. Basic IED functions, continued IEC 61850 or function Description name RUNTIME IED Runtime Comp CAMCONFIG Central account management configuration CAMSTATUS Central account management status TOOLINF Tools Information component SAFEFILECOPY Safe file copy function Table 6.
  • Page 21 1MRK 511 361-BEN D Bay control REC670 2.1 IEC circuit breaker to close first and the second will only • Substitution of position indications close if the fault proved to be transient. • Overriding of interlocking functions • Overriding of synchrocheck Each autoreclosing function is configured to co-operate •...
  • Page 22 1MRK 511 361-BEN D Bay control REC670 2.1 IEC binary inputs TCMYLTC as well as Tap changer control Switch controller SCSWI and supervision, 32 binary inputs TCLYLTC are used for M13486-3 v7 The Switch controller (SCSWI) initializes and supervises control of power transformers with a on-load tap all functions to properly select and operate switching changer.
  • Page 23 1MRK 511 361-BEN D Bay control REC670 2.1 IEC Single point generic control 8 signals SPC8GAPC 5. Current protection SEMOD176462-4 v8 The Single point generic control 8 signals SPC8GAPC function block is a collection of 8 single point Instantaneous phase overcurrent protection PHPIOC commands, designed to bring in commands from M12910-3 v12 The instantaneous three phase overcurrent function has...
  • Page 24 1MRK 511 361-BEN D Bay control REC670 2.1 IEC EF4PTOC can also be used to provide a system back-up Thermal overload protection, one time constant for example, in the case of the primary protection being LCPTTR/LFPTTR out of service due to communication or voltage M12020-4 v13 The increasing utilization of the power system closer to transformer circuit failure.
  • Page 25 1MRK 511 361-BEN D Bay control REC670 2.1 IEC CCRBRF can be single- or three-phase initiated to allow Broken conductor check BRCPTOC use with single phase tripping applications. For the SEMOD171446-5 v2 The main purpose of the function Broken conductor three-phase version of CCRBRF the current criteria can check (BRCPTOC) is the detection of broken conductors be set to operate only if two out of four for example,...
  • Page 26 1MRK 511 361-BEN D Bay control REC670 2.1 IEC combined with a directional reactive over-power SAPTUF is provided with undervoltage blocking. function to supervise the system voltage. When The operation is based on positive sequence voltage triggered, the function will cause an alarm, switch in measurement and requires two phase-phase or three reactors, or switch out capacitor banks.
  • Page 27 1MRK 511 361-BEN D Bay control REC670 2.1 IEC triggers the individual event timer, which is the continuous time spent within the given frequency band, 9. Secondary system supervision and the accumulation timer, which is the cumulative time spent within the given frequency band. Once the Current circuit supervision CCSSPVC M12444-3 v10 timers reach their limit, an alarm or trip signal is...
  • Page 28 1MRK 511 361-BEN D Bay control REC670 2.1 IEC • Distance protection function. On verification of a weak end infeed condition, the weak • Undervoltage function. end infeed logic provides an output for sending the • Energisation function and voltage check for the weak received teleprotection signal back to the remote infeed logic.
  • Page 29 1MRK 511 361-BEN D Bay control REC670 2.1 IEC M13928-6 v2 If parallel lines are connected to common busbars at GUID-D8D1A4EE-A87F-46C6-8529-277FC1ADA9B0 v3 The group indication logic function INDCALH is used to both terminals, overreaching permissive communication route several indication signals to a common indication, schemes can trip unselectively due to fault current LED and/or contact, in the IED.
  • Page 30 1MRK 511 361-BEN D Bay control REC670 2.1 IEC • XOR function block. Each block has two outputs where SEMOD175725-4 v4 Boolean 16 to integer conversion function B16I is used to one is inverted. transform a set of 16 binary (logical) signals into an integer.
  • Page 31 1MRK 511 361-BEN D Bay control REC670 2.1 IEC • measured voltages, currents, frequency, active, about the recordings. The disturbance report files may reactive and apparent power and power factor be uploaded to PCM600 for further analysis using the • measured analog values from merging units disturbance handling tool.
  • Page 32 1MRK 511 361-BEN D Bay control REC670 2.1 IEC The trip value recorder information is available for the Measured value expander block RANGE_XP disturbances locally in the IED. SEMOD52450-4 v7 The current and voltage measurements functions (CVMMXN, CMMXU, VMMXU and VNMMXU), current and The trip value recorder information is an integrated part voltage sequence measurement functions (CMSQI and of the disturbance record (Comtrade file).
  • Page 33 1MRK 511 361-BEN D Bay control REC670 2.1 IEC currents, is used to exactly calculate the fault position. input and calculates the accumulated active and reactive The fault can be recalculated with new source data at energy pulses, in forward and reverse direction. Energy the actual fault to further increase the accuracy.

  • Page 34: Station Communication

    The LHMI is used for setting, monitoring and controlling. SPA communication protocol SEMOD120134-5 v1 A single glass or plastic port is provided for the ABB SPA protocol. This allows extensions of simple substation 15. Basic IED functions automation systems but the main use is for Substation Monitoring Systems SMS.

  • Page 35: Remote Communication

    1MRK 511 361-BEN D Bay control REC670 2.1 IEC GUID-3C6C7DAC-1DB1-4CB8-991F-3B1D86551F28 v3 DNP3.0 communication protocol A module with built-in galvanic X.21 converter which e.g. SEMOD153688-5 v1 An electrical RS485 and an optical Ethernet port is can be connected to modems for pilot wires is also available for the DNP3.0 communication.
  • Page 36 1MRK 511 361-BEN D Bay control REC670 2.1 IEC transducers. The module has six independent, connection to an antenna. It also includes an optical PPS galvanically separated channels. ST-connector output. Optical ethernet module OEM IRIG-B Time synchronizing module M16073-3 v6 SEMOD141113-4 v7 The optical fast-ethernet module is used for fast and The IRIG-B time synchronizing module is used for...
  • Page 37 1MRK 511 361-BEN D Bay control REC670 2.1 IEC IEC06000182-2-en.vsd IEC06000182 V2 EN-US Figure 8. A 1/2 x 19” size IED side-by-side with RHGS6. M15243-12 v7 xx08000165.vsd IEC08000165 V1 EN-US Figure 7. Case with rear cover and 19” rack mounting kit Case size (mm)/ (inches)

  • Page 38: Connection Diagrams

    Connection diagram, REC670 2.1, C30 1MRK002803-FC The latest versions of the connection diagrams can be Connection diagrams for Customized products downloaded from http://www.abb.com/substationautomation. Connection diagram, 670 series 2.1 1MRK002802-AF Connection diagrams for Customized products Connection diagram, 670 series 2.11MRK002801-AF...

  • Page 39: Technical Data

    1MRK 511 361-BEN D Bay control REC670 2.1 IEC 20. Technical data General M10993-1 v3 IP11376-1 v2 Definitions Reference value The specified value of an influencing factor to which are referred the characteristics of the equipment Nominal range The range of values of an influencing quantity (factor) within which, under specified conditions, the equipment meets the specified requirements Operative range The range of values of a given energizing quantity for which the equipment, under specified conditions, is able to...
  • Page 40 1MRK 511 361-BEN D Bay control REC670 2.1 IEC Analog inputs M16988-1 v11 IP15842-1 v1 Table 7. TRM - Energizing quantities, rated values and limits for protection transformer Description Value Frequency Rated frequency f 50/60 Hz Operating range ± 10% Current inputs Rated current I 1 or 5 A...
  • Page 41 1MRK 511 361-BEN D Bay control REC670 2.1 IEC Table 8. TRM - Energizing quantities, rated values and limits for measuring transformer Description Value Frequency Rated frequency f 50/60 Hz Operating range ± 10% Current inputs Rated current I Operating range (0-1.8) ×...
  • Page 42 1MRK 511 361-BEN D Bay control REC670 2.1 IEC Auxiliary DC voltage M12286-1 v4 IP15843-1 v3 Table 11. PSM - Power supply module Quantity Rated value Nominal range Auxiliary dc voltage, EL (input) EL = (24 - 60) V EL ±20% EL = (90 - 250) V EL ±20% Power consumption...
  • Page 43 1MRK 511 361-BEN D Bay control REC670 2.1 IEC Maximum 176 binary input channels The stated operate time for functions may be activated simultaneously with include the operating time for the influencing factors within nominal binary inputs and outputs. range. M50609-2 v9 Table 13.
  • Page 44 1MRK 511 361-BEN D Bay control REC670 2.1 IEC Maximum 176 binary input channels The stated operate time for functions may be activated simultaneously with include the operating time for the influencing factors within nominal binary inputs and outputs. range. M12573-1 v8.1.1 Table 14.
  • Page 45 1MRK 511 361-BEN D Bay control REC670 2.1 IEC Maximum 176 binary input channels The stated operate time for functions may be activated simultaneously with include the operating time for the influencing factors within nominal binary inputs and outputs. range. M12318-1 v10 Table 15.
  • Page 46 1MRK 511 361-BEN D Bay control REC670 2.1 IEC Maximum 72 outputs may be activated The stated operate time for functions simultaneously with influencing factors include the operating time for the within nominal range. After 6 ms an binary inputs and outputs. additional 24 outputs may be activated.
  • Page 47 1MRK 511 361-BEN D Bay control REC670 2.1 IEC Maximum 72 outputs may be activated The stated operate time for functions simultaneously with influencing factors include the operating time for the within nominal range. After 6 ms an binary inputs and outputs. additional 24 outputs may be activated.
  • Page 48 1MRK 511 361-BEN D Bay control REC670 2.1 IEC Table 18. SOM - Static Output module data (reference standard: IEC 61810-2): Electromechanical relay outputs Function of quantity Trip and signal relays Max system voltage 250 V AC/DC Min load voltage 24VDC Number of outputs Test voltage across open contact, 1 min...
  • Page 49 1MRK 511 361-BEN D Bay control REC670 2.1 IEC M12441-1 v10 The stated operate time for functions include the operating time for the binary inputs and outputs. Table 19. BOM - Binary output module contact data (reference standard: IEC 61810-2) Function or quantity Trip and Signal relays Binary outputs...
  • Page 50 1MRK 511 361-BEN D Bay control REC670 2.1 IEC Table 21. Auxiliary DC supply voltage influence on functionality during operation Dependence on Reference value Within nominal Influence range Ripple, in DC auxiliary voltage max. 2% 15% of EL 0.01%/% Operative range Full wave rectified Auxiliary voltage dependence,...
  • Page 51 1MRK 511 361-BEN D Bay control REC670 2.1 IEC Table 23. Electromagnetic compatibility Test Type test values Reference standards 1 MHz burst disturbance 2.5 kV IEC 60255-26 100 kHz slow damped oscillatory wave immunity test 2.5 kV IEC 61000-4-18, Class III Ring wave immunity test, 100 kHz 2-4 kV IEC 61000-4-12, Class IV...
  • Page 52 1MRK 511 361-BEN D Bay control REC670 2.1 IEC Table 25. Environmental tests Test Type test value Reference standard Cold operation test Test Ad for 16 h at -25°C IEC 60068-2-1 Cold storage test Test Ab for 16 h at -40°C IEC 60068-2-1 Dry heat operation test Test Bd for 16 h at +70°C...
  • Page 53 1MRK 511 361-BEN D Bay control REC670 2.1 IEC Differential protection M13081-1 v12 Table 28. High impedance differential protection, single phase HZPDIF Function Range or value Accuracy Operate voltage (10-900) V ±1.0% of I at I ≤ I I=U/R ±1.0% of I at I > I Reset ratio >95% at (30-900) V Maximum continuous power...
  • Page 54 1MRK 511 361-BEN D Bay control REC670 2.1 IEC Current protection M12336-1 v11 Table 29. Instantaneous phase overcurrent protection PHPIOC Function Range or value Accuracy Operate current (5-2500)% of lBase ±1.0% of I at I ≤ I ±1.0% of I at I > I Reset ratio >...
  • Page 55 1MRK 511 361-BEN D Bay control REC670 2.1 IEC M12342-1 v21 Table 30. Directional phase overcurrent protection, four steps OC4PTOC Function Range or value Accuracy lBase Operate current, step 1-4 (5-2500)% of ±1.0% of I at I ≤ I ±1.0% of I at I > I Reset ratio >...
  • Page 56 1MRK 511 361-BEN D Bay control REC670 2.1 IEC M12340-2 v8 Table 31. Instantaneous residual overcurrent protection EFPIOC Function Range or value Accuracy Operate current (5-2500)% of lBase ±1.0% of I at I ≤ I ±1.0% of I at I > I Reset ratio >...
  • Page 57 1MRK 511 361-BEN D Bay control REC670 2.1 IEC M15223-1 v18 Table 32. Directional residual overcurrent protection, four steps EF4PTOC Function Range or value Accuracy Operate current, step 1-4 (1-2500)% of IBase ±1.0% of I at I ≤ I ±1.0% of I at I > I Reset ratio >...
  • Page 58 1MRK 511 361-BEN D Bay control REC670 2.1 IEC GUID-E83AD807-8FE0-4244-A50E-86B9AF92469E v5 Table 33. Four step negative sequence overcurrent protection NS4PTOC Function Range or value Accuracy lBase Operate current, step 1 - 4 (1-2500)% of ±1.0% of I at I £ I ±1.0% of I at I >...
  • Page 59 1MRK 511 361-BEN D Bay control REC670 2.1 IEC SEMOD173350-2 v13 Table 34. Sensitive directional residual overcurrent and power protection SDEPSDE Function Range or value Accuracy lBase (0.25-200.00)% of Operate level for 3I ·cosj ±1.0% of I at I £ I directional residual ±1.0% of I at I >...
  • Page 60 1MRK 511 361-BEN D Bay control REC670 2.1 IEC M12352-1 v15 Table 35. Thermal overload protection, one time constant LCPTTR/LFPTTR Function Range or value Accuracy Reference current (2-400)% of IBase ±1.0% of I Reference temperature (0-300)°C, (0 - 600)°F ±1.0°C, ±2.0°F Operate time: IEC 60255-149, ±5.0% or ±200 ms whichever is greater Time constant t = (1–1000)
  • Page 61 1MRK 511 361-BEN D Bay control REC670 2.1 IEC M12353-1 v13 Table 37. Breaker failure protection CCRBRF Function Range or value Accuracy lBase Operate phase current (5-200)% of ±1.0% of I at I £ I ±1.0% of I at I > I Reset ratio, phase current >...
  • Page 62 1MRK 511 361-BEN D Bay control REC670 2.1 IEC SEMOD175152-2 v10 Table 40. Directional underpower protection GUPPDUP Function Range or value Accuracy SBase Power level (0.0–500.0)% of ±1.0% of S at S ≤ S for Step 1 and Step 2 ±1.0% of S at S >...
  • Page 63 1MRK 511 361-BEN D Bay control REC670 2.1 IEC GUID-6A7DA510-E145-4C5B-A7DC-97BC4258E621 v8 Table 43. Capacitor bank protection CBPGAPC Function Range or value Accuracy Operate value, overcurrent (10-900)% of lBase ±2.0% of I at I ≤ I ±2.0% of I at I > I Reset ratio, overcurrent >95% at (100-900)% of IBase Start time, overcurrent, at 0.5 to 2 x Iset...
  • Page 64 1MRK 511 361-BEN D Bay control REC670 2.1 IEC Voltage protection M13290-1 v14 Table 44. Two step undervoltage protection UV2PTUV Function Range or value Accuracy UBase Operate voltage, low and high step (1.0–100.0)% of ±0.5% of U UBase Absolute hysteresis (0.0–50.0)% of ±0.5% of U UBase...
  • Page 65 1MRK 511 361-BEN D Bay control REC670 2.1 IEC M13304-1 v12 Table 45. Two step overvoltage protection OV2PTOV Function Range or value Accuracy UBase Operate voltage, step 1 and 2 (1.0-200.0)% of ±0.5% of U at U ≤ U ±0.5% of U at U > U UBase Absolute hysteresis (0.0–50.0)% of...
  • Page 66 1MRK 511 361-BEN D Bay control REC670 2.1 IEC M13317-2 v12 Table 46. Two step residual overvoltage protection ROV2PTOV Function Range or value Accuracy UBase Operate voltage, step 1 and step 2 (1.0-200.0)% of ± 0.5% of U at U ≤ U ±...
  • Page 67 1MRK 511 361-BEN D Bay control REC670 2.1 IEC SEMOD175210-2 v6 Table 48. Loss of voltage check LOVPTUV Function Range or value Accuracy Operate voltage (1–100)% of UBase ±0.5% of U Pulse timer when (0.050–60.000) s ±0.2% or ±15 ms whichever is greater disconnecting all three phases Time delay for enabling the (0.000–60.000) s...
  • Page 68 1MRK 511 361-BEN D Bay control REC670 2.1 IEC Frequency protection M13360-1 v13 Table 49. Underfrequency protection SAPTUF Function Range or value Accuracy Operate value, start function, at symmetrical (35.00-75.00) Hz ±2.0 mHz three phase voltage Operate time, start at f + 0.02 Hz to f - 0.02 Min.
  • Page 69 1MRK 511 361-BEN D Bay control REC670 2.1 IEC M14976-1 v10 Table 51. Rate-of-change of frequency protection SAPFRC Function Range or value Accuracy Operate value, start function (-10.00-10.00) Hz/s ±10.0 mHz/s Operate value, restore enable frequency (45.00-65.00) Hz ±2.0 mHz Definite restore time delay (0.000-60.000) s ±0.2% or ±100 ms whichever is...
  • Page 70 1MRK 511 361-BEN D Bay control REC670 2.1 IEC Multipurpose protection M13095-2 v7 Table 53. General current and voltage protection CVGAPC Function Range or value Accuracy Measuring current input phase1, phase2, phase3, PosSeq, - NegSeq, -3*ZeroSeq, MaxPh, MinPh, UnbalancePh, phase1-phase2, phase2- phase3, phase3-phase1, MaxPh-Ph, MinPh-Ph, UnbalancePh-Ph Measuring voltage input...
  • Page 71 1MRK 511 361-BEN D Bay control REC670 2.1 IEC Table 53. General current and voltage protection CVGAPC , continued Function Range or value Accuracy Independent time delay, overvoltage at 0.8 to 1.2 x U , step (0.00 - 6000.00) s ±0.2% or ±35 ms whichever is greater 1 - 2...
  • Page 72 1MRK 511 361-BEN D Bay control REC670 2.1 IEC GUID-7EA9731A-8D56-4689-9072-D72D9CDFD795 v7 Table 54. Voltage-restrained time overcurrent protection VRPVOC Function Range or value Accuracy Start overcurrent (2.0 - 5000.0)% of IBase ±1.0% of I at I ≤ I ±1.0% of I at I > I Reset ratio, overcurrent >...
  • Page 73 1MRK 511 361-BEN D Bay control REC670 2.1 IEC Secondary system supervision M12358-1 v9 Table 55. Current circuit supervision CCSSPVC Function Range or value Accuracy Operate current (10-200)% of IBase ±10.0% of I at I ≤ I ±10.0% of I at I > I Reset ratio, Operate current >90% Block current...
  • Page 74 1MRK 511 361-BEN D Bay control REC670 2.1 IEC GUID-E2EA8017-BB4B-48B0-BEDA-E71FEE353774 v4 Table 57. Fuse failure supervision VDSPVC Function Range or value Accuracy Operate value, block of main (10.0-80.0)% of UBase ±0.5% of Ur fuse failure Reset ratio <110% Operate time, block of main Min.
  • Page 75 1MRK 511 361-BEN D Bay control REC670 2.1 IEC Control M12359-1 v12 Table 58. Synchronizing, synchrocheck and energizing check SESRSYN Function Range or value Accuracy Phase shift, j (-180 to 180) degrees line Voltage high limit for synchronizing and synchrocheck (50.0-120.0)% of UBase ±0.5% of U at U ≤...
  • Page 76 1MRK 511 361-BEN D Bay control REC670 2.1 IEC M12379-1 v11 Table 59. Autorecloser SMBRREC Function Range or value Accuracy Number of autoreclosing shots 1 - 5 Autoreclosing open time: shot 1 - t1 1Ph (0.000-120.000) s ±0.2% or ±35 ms shot 1 - t1 2Ph whichever is greater shot 1 - t1 3PhHS...
  • Page 77 1MRK 511 361-BEN D Bay control REC670 2.1 IEC SEMOD175215-2 v12 Table 60. Voltage control TR1ATCC and TR8ATCC Function Range or value Accuracy Transformer reactance (0.1–200.0)Ω, primary Time delay for lower command when fast step down mode is (1.0–100.0) s activated Voltage control set voltage (85.0–120.0)% of UBase...
  • Page 78 1MRK 511 361-BEN D Bay control REC670 2.1 IEC Table 60. Voltage control TR1ATCC and TR8ATCC, continued Function Range or value Accuracy Time after position change before the value is accepted (1–60) s ±0.2% or ±200 ms whichever is greater Tap changer constant time-out (1–120) s ±0.2% or ±200 ms...
  • Page 79 1MRK 511 361-BEN D Bay control REC670 2.1 IEC Scheme communication M16038-1 v11 Table 61. Scheme communication logic for distance or overcurrent protection ZCPSCH Function Range or value Accuracy Scheme type Intertrip Permissive UR Permissive OR Blocking DeltaBlocking Operate voltage, Delta U (0–100)% of UBase ±5.0% of ΔU Operate current, Delta I...
  • Page 80 1MRK 511 361-BEN D Bay control REC670 2.1 IEC M16051-2 v11 Table 64. Current reversal and weak-end infeed logic for residual overcurrent protection ECRWPSCH Function Range or value Accuracy Operate mode of WEI logic Echo Echo & Trip Operate voltage 3U0 for WEI (5-70)% of UBase ±0.5% of U trip...
  • Page 81 1MRK 511 361-BEN D Bay control REC670 2.1 IEC Logic M12380-1 v9 Table 65. Tripping logic common 3-phase output SMPPTRC Function Range or value Accuracy Trip action 3-ph, 1/3-ph, 1/2/3-ph Minimum trip pulse length (0.000-60.000) s ±0.2% or ±15 ms whichever is greater 3-pole trip delay (0.020-0.500) s ±0.2% or ±15 ms whichever is greater...
  • Page 82 1MRK 511 361-BEN D Bay control REC670 2.1 IEC GUID-45DF373F-DC39-4E1B-B45B-6B454E8E0E50 v1 Table 72. Number of GATE instances Logic block Quantity with cycle time 3 ms 8 ms 100 ms GATE GUID-0EC4192A-EF03-47C0-AEC1-09B68B411A98 v1 Table 73. Number of INV instances Logic block Quantity with cycle time 3 ms 8 ms...
  • Page 83 1MRK 511 361-BEN D Bay control REC670 2.1 IEC GUID-0B07F78C-10BD-4070-AFF0-6EE36454AA03 v1 Table 80. Number of XOR instances Logic block Quantity with cycle time 3 ms 8 ms 100 ms GUID-23D4121A-4C9A-4072-BBE3-6DB076EDAB79 v1 Table 81. Number of ANDQT instances Logic block Quantity with cycle time 3 ms 8 ms 100 ms...
  • Page 84 1MRK 511 361-BEN D Bay control REC670 2.1 IEC GUID-94C803B4-6C5A-4072-AB5C-20DDE98C9A70 v1 Table 88. Number of RSMEMORYQT instances Logic block Quantity with cycle time 3 ms 8 ms 100 ms RSMEMORYQT GUID-341562FB-6149-495B-8A63-200DF16A5590 v1 Table 89. Number of SRMEMORYQT instances Logic block Quantity with cycle time 3 ms 8 ms...
  • Page 85 1MRK 511 361-BEN D Bay control REC670 2.1 IEC GUID-3820F464-D296-4CAD-8491-F3F997359D79 v1 Table 94. Number of BTIGAPC instances Function Quantity with cycle time 3 ms 8 ms 100 ms BTIGAPC GUID-B45901F4-B163-4696-8220-7F8CAC84D793 v1 Table 95. Number of IB16 instances Function Quantity with cycle time 3 ms 8 ms 100 ms...
  • Page 86 1MRK 511 361-BEN D Bay control REC670 2.1 IEC Monitoring M12386-1 v14.1.1 Table 100. Measurements CVMMXN Function Range or value Accuracy Frequency (0.95-1.05) x f ±2.0 mHz Voltage (10 to 300) V ±0.3% of U at U≤ 50 V ±0.2% of U at U> 50 V Current (0.1-4.0) x I ±0.8% of I at 0.1 x I...
  • Page 87 1MRK 511 361-BEN D Bay control REC670 2.1 IEC GUID-ED634B6D-9918-464F-B6A4-51B78129B819 v5 Table 103. Phase-neutral voltage measurement VNMMXU Function Range or value Accuracy Voltage (5 to 175) V ±0.5% of U at U ≤ 50 V ±0.2% of U at U > 50 V Phase angle (5 to 175) V ±0.5 degrees at U ≤...
  • Page 88 1MRK 511 361-BEN D Bay control REC670 2.1 IEC M12760-1 v9.1.1 Table 107. Disturbance report DRPRDRE Function Range or value Accuracy Pre-fault time (0.05–9.90) s Post-fault time (0.1–10.0) s Limit time (0.5–10.0) s Maximum number of recordings 100, first in - first out Time tagging resolution 1 ms See table...
  • Page 89 1MRK 511 361-BEN D Bay control REC670 2.1 IEC GUID-83B0F607-D898-403A-94FD-7FE8D45C73FF v6 Table 109. Insulation liquid monitoring function SSIML Function Range or value Accuracy Oil alarm level 1.00-100.00 ±10.0% of set value Oil lockout level 1.00-100.00 ±10.0% of set value Temperature alarm level -40.00-200.00 ±2.5% of set value Temperature lockout level...
  • Page 90 1MRK 511 361-BEN D Bay control REC670 2.1 IEC M12700-1 v4 Table 112. Event list Function Value Buffer capacity Maximum number of events in the list 1000 Resolution 1 ms Accuracy Depending on time synchronizing M13765-1 v5 Table 113. Indications Function Value Buffer capacity...
  • Page 91 1MRK 511 361-BEN D Bay control REC670 2.1 IEC Metering M13404-2 v5 Table 118. Pulse-counter logic PCFCNT Function Setting range Accuracy Input frequency See Binary Input Module (BIM) Cycle time for report of (1–3600) s counter value SEMOD153707-2 v4 Table 119. Energy metering ETPMMTR Function Range or value Accuracy...
  • Page 92 1MRK 511 361-BEN D Bay control REC670 2.1 IEC Station communication M15031-1 v7 Table 120. Communication protocols Function Value Protocol IEC 61850-8-1 Communication speed for the IEDs 100BASE-FX Protocol IEC 60870–5–103 Communication speed for the IEDs 9600 or 19200 Bd Protocol DNP3.0 Communication speed for the IEDs...
  • Page 93 1MRK 511 361-BEN D Bay control REC670 2.1 IEC M12589-1 v4 Table 125. SLM – LON port Quantity Range or value Optical connector Glass fiber: type ST Plastic fiber: type HFBR snap-in Fiber, optical budget Glass fiber: 11 dB (1000m/3000 ft typically *) Plastic fiber: 7 dB (10m/35ft typically *) Fiber diameter Glass fiber: 62.5/125 mm...
  • Page 94 1MRK 511 361-BEN D Bay control REC670 2.1 IEC M12756-1 v12 Remote communication Table 130. Line data communication module Characteristic Range or value Type of LDCM Short range (SR) Medium range (MR) Long range (LR) Type of fiber Multi-mode fiber Single-mode fiber Single-mode fiber glass 62.5/125 µm...
  • Page 95 1MRK 511 361-BEN D Bay control REC670 2.1 IEC Hardware M11778-1 v4 SEMOD53385-1 v1 Table 131. Case Material Steel sheet Front plate Steel sheet profile with cut-out for HMI Surface treatment Aluzink preplated steel Finish Light grey (RAL 7035) M12327-1 v3 Table 132.
  • Page 96 1MRK 511 361-BEN D Bay control REC670 2.1 IEC Because of limitations of space, when ring lug terminal is ordered for Binary I/O connections, one blank slot is necessary between two adjacent IO cards. Please refer to the ordering particulars for details.
  • Page 97 1MRK 511 361-BEN D Bay control REC670 2.1 IEC Basic IED functions M11963-1 v5 Table 137. Self supervision with internal event list Data Value Recording manner Continuous, event controlled List size 40 events, first in-first out M12331-1 v7 Table 138. Time synchronization, time tagging Function Value Time tagging resolution, events and sampled measurement values...
  • Page 98 1MRK 511 361-BEN D Bay control REC670 2.1 IEC SEMOD141136-2 v8 Table 141. IRIG-B Quantity Rated value Number of channels IRIG-B Number of optical channels Electrical connector: Electrical connector IRIG-B Pulse-width modulated 5 Vpp Amplitude modulated – low level 1-3 Vpp –...
  • Page 99 1MRK 511 361-BEN D Bay control REC670 2.1 IEC Inverse characteristic M12388-1 v23 Table 142. ANSI Inverse time characteristics Function Range or value Accuracy Operating characteristic: 0.05 ≤ k ≤ 999.00 ANSI/IEEE C37.112 , 1.5 x I ≤ I ≤ 20 x I ±2.0% or ±40 ms whichever is greater æ...
  • Page 100 1MRK 511 361-BEN D Bay control REC670 2.1 IEC Table 143. IEC Inverse time characteristics Function Range or value Accuracy Operating characteristic: 0.05 ≤ k ≤ 999.00 IEC 60255-151, ±2.0% 1.5 x I ≤ I ≤ 20 x I or ±40 ms whichever is greater æ...
  • Page 101 1MRK 511 361-BEN D Bay control REC670 2.1 IEC Table 144. RI and RD type inverse time characteristics Function Range or value Accuracy RI type inverse characteristic 0.05 ≤ k ≤ 999.00 IEC 60255-151, ±2.0% 1.5 x I ≤ I ≤ 20 x I or ±40 ms whichever is greater ×...
  • Page 102 1MRK 511 361-BEN D Bay control REC670 2.1 IEC Table 146. Inverse time characteristics for undervoltage protection Function Range or value Accuracy Type A curve: k = (0.05-1.10) in steps of 0.01 ±5.0% or ±45 ms whichever is greater æ ö...
  • Page 103 1MRK 511 361-BEN D Bay control REC670 2.1 IEC Table 147. Inverse time characteristics for residual overvoltage protection Function Range or value Accuracy Type A curve: k = (0.05-1.10) in steps ±5.0% or ±45 ms whichever is greater of 0.01 æ...

  • Page 104: Ordering For Customized Ied

    Remote end serial communication Serial communication unit for station communication Table 150. Product definition REC670* Table 151. Product definition ordering codes Product REC670* Software version Configuration alternatives Bay Control REC670 Bay control REC670 61850-9-2LE Selection: ACT configuration ABB Standard configuration...
  • Page 105 1MRK 511 361-BEN D Bay control REC670 2.1 IEC Table 152. Differential protection Positio Table 153. Differential functions Function Function Ordering no Positi Available Selected Notes identification and rules 1Ph High impedance differential protection HZPDIF 1MRK005904-HA Table 154. Impedance protection siti Table 155.
  • Page 106 1MRK 511 361-BEN D Bay control REC670 2.1 IEC Table 159. Frequency protection Position Table 160. Frequency functions Function Function Ordering no positi Available Selected Notes and identification rules Underfrequency protection SAPTUF 1MRK005914-AA Overfrequency protection SAPTOF 1MRK005914-BA Rate-of-change frequency protection SAPFRC 1MRK005914-CA Frequency time accumulation protection...
  • Page 107 1MRK 511 361-BEN D Bay control REC670 2.1 IEC Table 168. Control functions Function Function Ordering no Positi Available Selected Notes identification and rules Synchrocheck, energizing check and synchronizing SESRSYN 1MRK005917-AA Rule: Can only be ordered with Apparatu s control APC10/ APC15 Synchrocheck, energizing check and synchronizing...
  • Page 108 1MRK 511 361-BEN D Bay control REC670 2.1 IEC Table 170. Scheme communication functions Function Function Ordering no Positi Available Selected Notes identification and rules Scheme communication logic for distance or Overcurrent ZCPSCH 1MRK005920-AA protection Current reversal and weak-end infeed logic for distance ZCRWPSCH 1MRK005920-CA protection...
  • Page 109 1MRK 511 361-BEN D Bay control REC670 2.1 IEC Table 177. Language selection First local HMI user dialogue language Selection Notes and Rules HMI language, English IEC Additional HMI language No additional HMI language HMI language, English US Selected Table 178. Casing selection Casing Selection Notes and Rules...
  • Page 110 1MRK 511 361-BEN D Bay control REC670 2.1 IEC Table 183. Analog system selection Analog system Selection Notes and Rules No first TRM included Note: Only the same type of TRM (compression or ringlug) Compression terminals in the same terminal. Ringlug terminals First TRM 12I 1A, 50/60Hz First TRM 12I 5A, 50/60Hz...
  • Page 111 1MRK 511 361-BEN D Bay control REC670 2.1 IEC Table 184. Maximum quantity of I/O modules When ordering I/O modules, observe the maximum quantities according to the table below Note: Standard order of location for I/O modules is BIM-BOM-SOM-IOM-MIM from left to right as seen from the rear side of the IED, but can also be freely placed.
  • Page 112 1MRK 511 361-BEN D Bay control REC670 2.1 IEC Table 186. Binary input/output module selection Binary input/output Selection Notes and Rules modules Slot position (rear Note! Max 3 positions in 1/2 view) rack, 8 in 3/4 rack with 1 TRM, 5 in 3/4 rack with 2 TRM ,11 in 1/1 1/2 Case with 1 TRM █...
  • Page 113 1MRK 511 361-BEN D Bay control REC670 2.1 IEC SOM Static output Note: SOM must not be placed module, 12 outputs, in the following positions: 1/2 48-60 VDC case slot X51, 3/4 case 1 TRM slot X101, 3/4 case 2 TRM slot SOM static outputs X71, 1/1 case 1 TRM slot X161, module, 12 outputs,...

  • Page 114: Ordering For Pre-Configured Ied

    - 13 SOFTWARE Notes and Rules Version number Version no Selection for position #1. Configuration alternatives Notes and Rules Single breaker Bus coupler for double busbar Double breaker 1 1/2 breaker diameter ACT configuration ABB standard configuration Selection for position #2.
  • Page 115 1MRK 511 361-BEN D Bay control REC670 2.1 IEC Software options Notes and Rules No option All fields in the ordering form do not need to be filled in High impedance differential protections - 3 Note: A02 only in A30/A31/B30, blocks A07 only in C30 High impedance differential protections - 6...
  • Page 116 1MRK 511 361-BEN D Bay control REC670 2.1 IEC Casing Notes and Rules 1/2 x 19" case 3/4 x 19" case 1 TRM slot 3/4 x 19" case 2 TRM slots 1/1 x 19" case 1TRM slots 1/1 x 19" case 2 TRM slots Selection for position #5.
  • Page 117 1MRK 511 361-BEN D Bay control REC670 2.1 IEC Binary input/output module, mA and time synchronizating Notes and Rules boards. For pulse counting, for example kWh metering, the BIM with enhanced pulse counting capabilities must be used. Note: 1BIM and 1 BOM included in A30 and A31. 2 BIM and 1 BOM included in B30 and C30. Slot position (rear view) Note: Max 3 positions in 1/2 rack, 8 in 3/4 rack with 1 TRM, 5...
  • Page 118 1MRK 511 361-BEN D Bay control REC670 2.1 IEC Remote end communication, DNP serial comm. and time synchronization Notes and Rules modules Slot position (rear view) Note: The maximum number and type of LDCM modules supported depend on the total amount of modules (BIM, BOM, LDCM, OEM, GTM, SLM, RS485, IRIG-B) in the IED.

  • Page 119: Ordering For Accessories

    (ordering number RK926 315- IEDs is described in 1MRK 512 001-BEN and 1MRK BE). 001024-CA. Please refer to the website: Multi-breaker/Single or Three Phase trip with external www.abb.com/substationautomation for detailed neutral on current circuit (ordering number RK926 315- information. BV).
  • Page 120 1MRK 511 361-BEN D Bay control REC670 2.1 IEC Protection cover M15040-3 v5 Protective cover for rear side of RHGS6, 6U, 1/4 x 19” Quantity 1MRK 002 420-AE Protective cover for rear side of terminal, 6U, 1/2 x 19” Quantity 1MRK 002 420-AC Protective cover for rear side of terminal, 6U, 3/4 x 19”...
  • Page 121 1MRK 511 361-BEN D Bay control REC670 2.1 IEC Rule: Specify additional quantity of IED Connect CD requested . Quantity 1MRK 002 290-AD...
  • Page 122 1MRK 511 361-BEN D Bay control REC670 2.1 IEC User documentation Rule: Specify the number of printed manuals requested Application manual Quantity 1MRK 511 358-UEN ANSI Quantity 1MRK 511 310-UUS Technical manual Quantity 1MRK 511 359-UEN ANSI Quantity 1MRK 511 311-UUS Commissioning manual Quantity 1MRK 511 360-UEN...
  • Page 123 1MRK 511 361-BEN D Bay control REC670 2.1 IEC Engineering manual, 670 series Quantity 1MRK 511 355-UEN ANSI Quantity 1MRK 511 355-UUS Cyber security guideline Quantity 1MRK 511 356-UEN Reference information M2175-3 v4 For our reference and statistics we would be pleased to be provided with the following application data: Country: End user: Station name:...
  • Page 125 ABB AB Substation Automation Products SE-721 59 Västerås, Sweden Phone +46 (0) 21 32 50 00 Scan this QR code to visit our website www.abb.com/substationautomation © Copyright 2015 ABB. All rights reserved.

This manual is also suitable for:

Rec670

Table of Contents