ABB REC670 Product Manual page 63

Bay control REC670 2.2
Product version: 2.2.1
Table 39. Four step directional negative phase sequence overcurrent protection NS4PTOC
Function
Operate current, step 1 - 4
Reset ratio
Independent time delay at 0 to 2 x I
step 1 - 4
Minimum operate time for inverse curves,
step 1 - 4
Inverse time characteristics, see table
155, table 156 and table 157
Minimum operate current, step 1 - 4
Relay characteristic angle (RCA)
Operate current for directional release
Minimum polarizing voltage
Real part of negative sequence source
impedance used for current polarization
Imaginary part of negative sequence
source impedance used for current
polarization
Operate time, start non-directional at 0 to
2 x I
set
Reset time, start non-directional at 2 x I
to 0
Operate time, start non-directional at 0 to
10 x I
set
Reset time, start non-directional at 10 x
I to 0
set
Critical impulse time
Impulse margin time
Transient overreach
ABB
GUID-E83AD807-8FE0-4244-A50E-86B9AF92469E v6
Range or value
(1-2500)% of lBase
> 95% at (10-2500)% of
, (0.000-60.000) s
set
(0.000 - 60.000) s
16 curve types
(1.00 - 10000.00)% of
(-180 to 180) degrees
(1–100)% of IBase
UBase
(1–100)% of
(0.50-1000.00) W/phase
(0.50–3000.00) W/phase
Min. = 15 ms
Max. = 30 ms
Min. = 15 ms
set
Max. = 30 ms
Min. = 5 ms
Max. = 20 ms
Min. = 20 ms
Max. = 35 ms
10 ms typically at 0 to 2 x I
15 ms typically
<10% at τ = 100 ms
Accuracy
±1.0% of I at I £ I
r r
±1.0% of I at I > I
r
IBase
-
±0.2% or ±35 ms whichever is greater
±0.2% or ±35 ms whichever is greater
See table 155, table
IBase
±1.0% of I at I ≤ I
r r
±1.0% of I at I > I
r
±2.0 degrees
For RCA ±60 degrees:
±2.5% of I at I ≤ I
r r
±2.5% of I at I > I
r
±0.5% of U
r
-
-
-
-
-
-
-
set
-
-
1MRK 511 404-BEN A
156 and table 157
63