Appendix A Technical Performance Of Receiver And Transmitter; Performance Of Receiver; Frequency Coverage; Access Probe Acquisition - Huawei Airbridge cBTS3612-1900 User Manual

Cdma base station
Table of Contents

Advertisement

User Manual
Airbridge cBTS3612 CDMA Base Station
Appendix A Technical Performance of Receiver
The technical specifications of BTS receivers and transmitters comply with or
surpass all the performance requirements defined in the IS-97-D Recommended
Minimum Performance Standards for cdma2000 Spread Spectrum Base Stations.
A.1 Performance of Receiver
A.1.1 Frequency Coverage
450MHz band: 450 - 460MHz
800MHz band: 824 - 849MHz
1900MHz band: 1850 - 1910MHz
A.1.2 Access Probe Acquisition
The access probe failure rates under the reliability of 90% is below the maximum
values listed in Table A-1:
Table A-1 Access probe failure rates
5.5
6.5
A.1.3 R-TCH Demodulation Performance
I. Performance of R-TCH in Additive White Gaussian Noise (AWGN)
The demodulation performance of the Reverse Traffic Channel in AWGN (no fading
or multipath) environment is determined by the frame error rate (FER) at specified
Eb/N0 value. FER of 4 possible data rates should be calculated respectively. With
95% confidence, the FER for each data rate does not exceed the two given FERs in
Table A -2 t o Table A -9, which adopt the linear interpolation in the form of Log
and Transmitter
Eb/N0 Per RF input point (dB)
Appendix A Technical Performance of Receiver
50%
10%
A-1
System Description
and Transmitter
Maximum failure rate
10
(FER).

Advertisement

Table of Contents
loading

Table of Contents