Replacing the base cover
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Procedure
1
Slide the tabs on the base cover into the slots on the palm rest and keyboard
assembly and snap the base cover into place.
2
Replace the ten screws (M2.5x7) that secure the base cover to the palm rest
and keyboard assembly.
computer. After working inside your computer, follow
After working inside your
computer. For more safety best
www.dell.com/
Before
19