Removing The Power And Volume-Buttons Board; Prerequisites; Procedure - Dell Inspiron 15 5000 Service Manual

Removing the power and volume-
buttons board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.

Prerequisites

1 Remove the base
2 Remove the battery.

Procedure

1 Disconnect the coin-cell battery cable from the I/O board.
2 Disconnect the power and volume-buttons board cable from the I/O board.
3 Peel off the tape tat secures the power and volume-buttons board cable to the
palm rest and keyboard assembly.
4 Remove the power and volume-buttons board cable from the routing guides on
the palm rest and keyboard assembly and the speaker.
5 Remove the screw (M2x3) that secures the power and volume-buttons board to
the palm rest and keyboard assembly.
62
computer. After working inside your computer, follow
After working inside your
cover.
computer. For more safety best
www.dell.com/
Before