Replacing The Power And Volume-Buttons Board; Procedure; Post-Requisites - Dell Inspiron 15 5000 Service Manual

Replacing the power and volume-
buttons board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.

Procedure

1 Using the alignment posts, place the power and volume-buttons board on the
palm rest and keyboard assembly.
2 Replace the screw (M2x3) that secures the power and volume-buttons board to
the palm rest and keyboard assembly.
3 Route the power and volume-buttons board cable through the routing guides on
the palm rest and keyboard assembly and the speaker.
4 Connect the power and volume-buttons board cable to the I/O board.
5 Adhere the tape that secures the power and volume-buttons board to the palm
rest and keyboard assembly.
6 Connect the coin-cell battery cable to the I/O board.

Post-requisites

1 Replace the battery.
2 Replace the base
64
computer. After working inside your computer, follow
After working inside your
cover.
computer. For more safety best
www.dell.com/
Before