Replacing The Display Cable; Procedure; Post-Requisites - Dell Inspiron 15 5000 Service Manual

Replacing the display cable

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.

Procedure

1 Adhere the tape that secures the display cable to the display-panel assembly.
2 Route the display cable through the routing guides on the display-panel assembly.
3 Slide the display cable into the connector on the display panel and close the latch
to secure the cable.
4 Adhere the tape on the display-cable connector.
5 Slide the sensor-board cable into the connector on the sensor board and close
the latch to secure the cable.
6 Adhere the tape on the sensor-board connector.

Post-requisites

1 Replace the camera.
2 Follow the procedure from step 5 to step 6 in
3 Replace the display
4 Replace the battery.
5 Replace the base
computer. After working inside your computer, follow
After working inside your
assembly.
cover.
computer. For more safety best
www.dell.com/
"Replacing the display
Before
panel".
89