Approvals - Siemens SCALANCE S612 Commissioning And Hardware Installation Manual

Approvals

The SIMATIC NET products described in these Operating Instructions have the approvals
listed below.
Note
Issued approvals on the type plate of the device
The specified approvals apply only when the corresponding mark is printed on the product.
You can check which of the following approvals have been granted for your product by the
markings on the type plate.
Current approvals on the Internet
You will find the current approvals for the product on the Internet pages of Siemens Industry
Online Support.
https://support.industry.siemens.com/cs/ww/de/en/15327/cert
(https://support.industry.siemens.com/cs/ww/en/ps/15327/cert)
EC directives
SIMATIC NET products meet the requirements and aims of the following EC directives.
EMC directive (electromagnetic compatibility)
The SIMATIC NET products described in these operating instructions meet the requirements
of EC directive 2004/108/EC "Electromagnetic Compatibility" for the following areas of
application:
Field of application
Industry
RoHS directive (Restriction of certain Hazardous Substances)
The SIMATIC NET products described in these operating instructions meet the requirements
of the EC directive 2011/65/EC for the restriction of the use of certain hazardous substances
in electrical and electronic equipment.
● Applied standard: EN 50581:2012
SCALANCE S
Commissioning and Hardware Installation Manual, 05/2016, C79000-G8976-C266-06
RF interference level
EN 61000-6-4 : 2007
Requirements
Immunity to interference
EN 61000-6-2 : 2005
A
Degree of protec-
tion
IP20
49