Configuring Administrator's Condition At Homepage; System Configuration - Philips NetCam 4 Installation Instructions Manual

NetCam_ii_99011_0047.qxd
NetCam4
Both default administrator's ID and password are set as 'admin', and
administrator may change them (max 9 characters) at the Admin page.
4.2

Configuring Administrator's Condition at Homepage

4.2.1

System Configuration

Set date & time, name, location, and description of your NetCam4. The model
and serial number appear automatically.
Video Channel Selection for CAM#1: You may decide to use one external CCD
camera connecting to the port of 'Ch1' in the rear of NetCam4 or use self-
contained CCD module of NetCam4. Note that this menu is only for the first
port in the rear of NetCam4 with name 'CH1'.
Date & Time: There are three date & time menus.
'NetCam4 Current Date & Time', the date and time set in NetCam4
I
appears.
'System(PC) Current Date & Time', the same date and time set on the
I
administrator's PC appears. You may copy the system (PC)'s date and time
into NetCam4 by clicking 'Time Synchronization' button.
'Manual Date & Time Setting', you may set date and time. To synchronize
I
manually, set date and time with 'NetCam4 Current Date & Time' by
clicking 'Time Synchronization' button.
28
12/13/00 1:55 PM Page 28
Section 4