Huawei SmartLogger1000 Quick Manual page 7

2. Drill holes using a hammer drill and install expansion sleeves and bolts.
3. Mount the SmartLogger to the bolts that have been secured to the wall with the mounting
holes in the rear of the SmartLogger.
NOTICE
When wall-mounting the SmartLogger, ensure that the cable connection area faces downwards for
ease of cable connection and maintenance.
Along a Guide Rail
Huawei does not provide the SmartLogger guide rail. If you choose this installation mode, prepare
a 35 mm standard guide rail by yourself.
Unit: mm
1. Snap the guide rail clamp in the rear of the SmartLogger into the guide rail.
1. Secure the guide rail before mounting the
SmartLogger.
2. Verify that the length of the guide rail is
sufficient for securing the SmartLogger. The
recommended length is 250 mm or greater.
Click
6
NOTE