Table of Contents
Advertisement
MIC IP starlight 7000i
8
Connections
8.1
About Camera Power and Control
The camera transmits PTZ control commands and images over a TCP/IP or UDP/IP network. It
also allows users to configure the camera display settings, camera operating settings, and to
configure the network parameters.
The camera incorporates a network video server in the IP module. The primary function of the
server is to encode video and control data for transmission over a TCP/IP or UDP/IP network.
With its H.264 or H2.65 encoding, it is ideally suited for IP communication and for remote
access to digital video recorders and multiplexers. The use of existing networks means that
integration with CCTV systems or local networks can be achieved quickly and easily. Video
images from a single camera can be received on several receivers simultaneously.
8.2
Power Source Options
The camera can be powered by a network compliant to High Power-over-Ethernet using a
Bosch model of High PoE Midspan (sold separately) or other device known to be compatible.
With this configuration, only a single (Cat5e/Cat6e) cable connection is required to view, to
power, and to control the camera.
For maximum reliability, the camera can be connected simultaneously to a High PoE Midspan
and a separate 24 VAC power source. If High PoE and 24 VAC are applied simultaneously, the
camera usually selects the High PoE Midspan and will draw minimal power from the auxiliary
input (24 VAC). If the High PoE Midspan power source fails, the camera switches power input
seamlessly to 24 VAC. After the High PoE Midspan power source is restored, the camera
switches power input again to the High PoE Midspan.
In the table below, an "X" identifies the power source options for MIC IP camera models.
CAMERA MODELS
The table below identifies the power devices that can be connected simultaneously to the
camera.
60 W midspan (NPD-6001A)
95 W midspan (NPD-9501A)
VIDEOJET connect 7000 (VJC-7000-90)
Notice!
Connect the 24 VAC connections from the MIC camera to the heater output of the power
supply (VG4-A-PSU1 or VG4-A-PSU2).
Bosch Security Systems
60 W midspan 95 W midspan
Models with
illuminator
Models without
illuminator
If power is supplied from:
Installation Manual
X
X
X
Camera can receive power simultaneously from:
24 VAC PSU: VG4-A-PSU1 or VG4-A-PSU2
Connections | en
VIDEOJET connect
24 VAC PSU
7000
X
X
2017.09 | 0.12 | F.01U.xxx.xxx
27
X
X
Hide quick links:
Advertisement
Table of Contents
