Sony MVS-6520 User Manual page 439

Icon Message
[Append Key Frame] cannot be
executed.
Key Frame Register is not active.
(UserX)
Backup
No external HDD was found (–2).
Format operation failed (–10).
Format operation failed (–11).
Cannot access the partition (–12).
Cannot access the directory (–20).
Cannot access the directory (–21).
The external HDD is busy (–22).
ERROR (–31).
Backup operation failed (–34).
Backup operation failed (–36).
Cannot be executed.
Amount of FM files exceeds the
capacity of usable frame memory.
Cannot be executed.
The function requires two frames of
frame memory.
No directory exists (–50).
Rename operation failed (–52).
Rename operation failed (–53).
Invalid FM OutCh (–6).
Specified FM OutCh was locked (–7).
Not enough free register area for
Backup or Restore process (–10).
Prepare failed, not any file was found
on this board (–11).
Backup failed, not prepared yet (–12).
Backup failed, Clip recall failed (–13).
Prepare failed, Clip create failed (–14). 2564: Frame Memory >External Device >Backup to DDR/VTR
Description
2515: Frame Memory >Still >Create Key Frame
When [Append Key Frame] was pressed, the region selection button for a
register on the Flexi Pad was not selected. Select the region selection
button [UserX] on the Flexi Pad, and try again.
2562: Frame Memory >External Device >Ext HDD Backup/Restore
When [Backup] was pressed, the external HDD could not be found. Check
that the external HDD is correctly connected.
2562: Frame Memory >External Device >Ext HDD Backup/Restore
When [Backup] was pressed, formatting of the HDD failed.
2562: Frame Memory >External Device >Ext HDD Backup/Restore
When [Backup] was pressed, the logical drives of the external HDD could
not be accessed. Check that the external HDD is correctly formatted.
2562: Frame Memory >External Device >Ext HDD Backup/Restore
When [Backup] was pressed, the directory of the external HDD could not be
accessed.
2562: Frame Memory >External Device >Ext HDD Backup/Restore
When [Backup] was pressed, the external HDD was busy and could not be
accessed. Check that the access lamp of the HDD or the menu indicator is
turned off, and try again.
2562: Frame Memory >External Device >Ext HDD Backup/Restore
When [Backup] was pressed, the external HDD could not be written to
because the clip is currently playing or recording.
2562: Frame Memory >External Device >Ext HDD Backup/Restore
When [Backup] was pressed, the process to store the file to the external
HDD failed.
2562: Frame Memory >External Device >Ext HDD Backup/Restore
When [Backup] was pressed, the number of files exceeded the storage limit.
2562: Frame Memory >External Device >Ext HDD Backup/Restore
When [Backup] was pressed, two files were required but there was only one
file remaining.
2562: Frame Memory >External Device >Ext HDD Backup/Restore
When [Backup] was pressed, the specified directory did not exist.
2562: Frame Memory >External Device >Ext HDD Backup/Restore
When [Backup] was pressed, renaming the directory failed.
2564: Frame Memory >External Device >Backup to DDR/VTR
When [Backup Start] was pressed, the specified frame memory output
channel could not be used.
2564: Frame Memory >External Device >Backup to DDR/VTR
When [Backup Start] was pressed, the specified frame memory output
channel was locked.
2564: Frame Memory >External Device >Backup to DDR/VTR
When [Backup Start] was pressed, there was insufficient capacity to carry
out the backup.
2564: Frame Memory >External Device >Backup to DDR/VTR
When [Backup Start] was pressed, no image files were found.
2564: Frame Memory >External Device >Backup to DDR/VTR
When [Backup Start] was pressed, the device was not yet ready.
2564: Frame Memory >External Device >Backup to DDR/VTR
When [Backup Start] was pressed, All One Clip recall failed (internal
processing error).
When [Backup Start] was pressed, All One Clip creation failed (internal
processing error).
437
Error Messages