Signal Assignment And Selection - Sony MVS-6520 User Manual

Bank Bus name Cross-point
button row
PGM/ Program Program
PST bus row
Preset bus Preset row
DSK1 bus 2nd row
DSK2 bus
DSK3 bus
DSK4 bus
M/E-1 Utility bus 2nd row
PGM/
PST
AUX1 to
AUX24
buses
Frame
memory
source 1
and 2
buses
DME1,
DME2,
DME5 to
DME8
video
a)
buses
DME1,
DME2,
DME5 to
DME8 key
a)
buses
Edit
preview
bus
DME
external
b)
video bus
a) DME1 and DME2 are enabled when using the MKS-6570 only. DME5 to
DME8 are enabled when using the MVE-8000A/9000 only.
b) MVS-6520/6530/3000A only

Signal Assignment and Selection

Assigning signals to buttons
Each of the cross-point buttons and reentry buttons has a
corresponding button number, to which you assign a
signal.
In addition to the signals input to the connectors at the rear
of the switcher processor, you can also select signals
generated within the switcher.
Each button has assigned to it a video signal and a key
signal, forming a pair. You can set these video and key
combinations in the Setup menu.
Cross-point control block button numbers
Delegation operation
–
–
In the 1st row, press
the button to which the
corresponding key
was assigned in the
Setup menu, turning it
on.
In the 1st row, press
the button to which
UTIL1 was assigned in
the Setup menu,
turning it on.
In the 1st row, press
the button to which the
corresponding bus
was assigned in the
Setup menu, turning it
on.
On each switcher bank, each cross-point button and
reentry button has two button numbers, and you use the
shift button to switch between these numbers.
This section describes a unit with 24 cross-point buttons as
an example.
The button numbers on the cross-point control block are as
follows.
(first button numbers)
(second button
numbers)
Cross-point control block (ICP-6520/6530)
(first button numbers)
(second button
numbers)
Cross-point control block (ICP-3000)
(first button numbers)
(second button numbers)
Cross-point control block (ICP-3016)
Cross-point control block button numbers
Button Number when
the shift button
is not pressed
From the left end to 1 to 23
the 23rd button
Shift buttons
Shift buttons
Shift buttons
Shift buttons
Shift buttons
Shift buttons
Number when
the shift button
is pressed
24 to 46
61
Signal Selection