Installation And Start Of Metpoint® Ocv Data Log - Beko METPOINT OCV Instructions For Installation And Operation Manual

8 The METPOINT
8.1 Installation and start of METPOINT® OCV DATA LOG
®
To use METPOINT OCV DATA LOG, the program must be installed from the CD-ROM provided.
To do so, insert CD into the CD drive of your PC or notebook. If your autostart function is
activated, the installation program will start automatically. Otherwise, go to Windows Explorer on
the CD, search for the setup.exe or setup file, and double-click.
To install the program, follow the installation instructions.
After successful installation, you can start the programs by double-clicking on the newly created
symbol / icon on your Desktop or in the Start menu.
Note to the network administrator
Communication via a network between METPOINT
®
OCV DATA LOG software only if both are in the same subnet. You can
METPOINT
find out in the manual for your router whether and how the forwarding function is
executed in your router.
Requisite firewall settings:
HTTP:
in addition:
FTP connection:
It is also possible to manually establish an FTP connection to a device in another
subnet. Please contact your network administrator.
"metpoint" for the user name and "logfiles" for the password must be specified as the
login data.
mdi - Manufacturers Distributor, Inc Phone: (727) 835 - 0670 | Fax: (813) 571 – 0422 www.BekoSales.com | Sales@BekoSales.com
®
OCV DATA LOG program
Enable port 1111 (in- and outbound)
Enable port 5000 (TCP) for device update
Port 21 (TCP) (outbound for passive only)
Port 21 (TCP) (in- and outbound for active)
®
OCV and a PC works with the