Manual Network Connection - Beko METPOINT OCV Instructions For Installation And Operation Manual

7.4

Manual network connection

Here, the network connection data must be entered manually. The following entries are required:
• IP address
• Net mask
• Gateway address
It must be ensured that different IP addresses are assigned to all devices in the
network. However, the network portion of the IP address must be identical for all
devices that communicate with each other within a network.
NOTE!
Please call on the assistance of appropriately trained and authorized IT specialists.
mdi - Manufacturers Distributor, Inc Phone: (727) 835 - 0670 | Fax: (813) 571 – 0422 www.BekoSales.com | Sales@BekoSales.com