General Information - Beko METPOINT OCV Instructions For Installation And Operation Manual

2 General information

Before reading the operating manual check whether you have the right manual at hand.
The operating manual must be accessibly available at all times at the site where the
software is being used.
To ensure a secure transfer of data, the software must be installed and used solely in
accordance with the specifications in the operating manual.
Disregarding the installation and operating manual results in risk to persons, plant and
equipment.
3 Scope of application and proper use
®
The METPOINT OCV DATA LOG software is used for displaying and storing the measured
values collected using METPOINT
The manufacturer is not liable for the consequences of improper use. The operator is solely
responsible for any risk that might result.
mdi - Manufacturers Distributor, Inc Phone: (727) 835 - 0670 | Fax: (813) 571 – 0422 www.BekoSales.com | Sales@BekoSales.com
®
OCV. Any use in excess of this is considered as unintended.