6. Slide the storage drive bracket with the converter into the storage drive bay until it snaps into position.
Figure 96. Installing the type
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to "Completing the parts replacement" on page 220.
M.2 solid-state drive
Attention: Do not open your computer or attempt any repair before reading and understanding the Chapter
1 "Read this first: Important safety information" on page 1.
An M.2 solid-state drive can be installed on the M.2 solid-sate drive holder or an M.2 solid-state drive PCIe
adapter.
M.2 solid-state drive in the M.2 solid-sate drive holder
To remove or install an M.2 solid-state drive, do the following:
1. Prepare your computer. See "Preparing your computer and removing the computer cover" on page 103.
2. Lay the computer on its side for easier access to the M.2 solid-state drive slots.
3. Locate the M.2 solid-state drive slots. See "Parts on the system board" on page 38.
146
P720 Hardware Maintenance Manual
2
storage drive bracket