b. Pivot the other end of the memory air baffle downward. Ensure that the two notches on the other end
of the memory air baffle fit into the gaps between memory slots.
Figure 144. Pivoting the other end of the memory air baffle downward
c. Close the handle of the memory air baffle.
Figure 145. Closing the handle of the memory air baffle
11. Reinstall the rear fan assembly and the flex-bay bracket.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to "Completing the parts replacement" on page 220.
Coin-cell battery
Attention: Do not open your computer or attempt any repair before reading and understanding the Chapter
1 "Read this first: Important safety information" on page 1.
178
P720 Hardware Maintenance Manual