The Interface Screens; Quick Start; Figure 11: Quick Start Web Page - Motorola Canopy User Manual

THE INTERFACE SCREENS

The Canopy Access Point module contains a series of web pages that are used to interface to the
unit. The following is a quick reference to interface screens. Note: These screens are subject to
change by subsequent software versions. To access the web based interface you first must be on
a computer that is in some way connected to the Access Point module. This can be done either
directly or through a network. Enter the IP address of the Access Point module (default is
169.254.1.1) into the address bar of your browser and hit enter on your keyboard. The following
web based interface pages are accessible:
•

Quick Start

•
Status
•
Configuration
•
Event Log
•
LUID Select
•
Link Test
•
Time & Date
•
Sessions
•
GPS Status
•
Ethernet Stats
•
ExtendedStats
QUICK START
The Canopy System consists of a family of highly flexible, fixed wireless access devices that can
be put into service quickly and with a minimal configuration. The Quick Start is a wizard that walks
the operator through that configuration. To place an Access Point module into operation, only three
parameters need to be configured:
•
RF Carrier Frequency
AP_CMM2 User Manual

Figure 11: Quick Start web page

Page 32 of 49