Diagnostics And Upkeep; Diagnostics Options - Siemens CP 1243-7 LTE Operating Instructions Manual

Diagnostics and upkeep

6.1

Diagnostics options

The following diagnostics options are available:
LEDs of the module
For information on the LED displays, refer to the section LEDs (Page 28).
TeleService
From the engineering station you can connect to the remote station via mobile wireless using
TeleService and view the diagnostics data of the CP. For information on establishing a
TeleService connection, see below.
For the diagnostics contents see below ("Online > Online and diagnostics").
STEP 7: The "Diagnostics" tab in the Inspector window
Here, you can obtain the following information about the online status of the selected
module.
STEP 7: Diagnostics functions in the "Online > Online and diagnostics" menu
Using the online functions, you can read diagnostics information from the CP from an
engineering station on which the project with the CP is stored.
If you want to operate online diagnostics with the station via the CP, you need to activate the
online functions in the parameter group "Communication types".
"Diagnostics" group
Here, you can obtain the following static information on the selected module:
● General information on the module
General information on the module
● Diagnostics status
Information on the diagnostics status
● Ethernet port
Address and statistical information
CP 1243-7 LTE
Operating Instructions, 04/2017, C79000-G8976-C381-03
6
119