Processing Status Of Messages - Siemens CP 1243-7 LTE Operating Instructions Manual

Diagnostics and upkeep

6.2 Processing status of messages

Failed mobile wireless transmission
If mobile wireless transmission is not working but all other settings and connections are
correct, check the external power supply of the CP.
6.2 Processing status of messages
Processing status
If the option "Enable identifier for processing status" is enabled in the message editor for a
message, a status is output on the CP that provides information about the processing status
of the sent message. The status is written to a PLC tag of the type DWORD. Select this tag
via the "PLC tag for processing status" box.
The meaning of the statuses is as follows:
Table 6- 1
Status
0000
0001
Table 6- 2
Status
0000
82xx
8401
8403
8405
8406
8407
8408
8409
8410
122
SMS: Meaning of the status ID output in hexadecimal format
Meaning
Transfer completed free of errors
Error in the transfer, possible causes:
SIM card invalid
•
No network
•
Wrong destination phone number (number not reachable)
•
E-mails: Meaning of the status ID output in hexadecimal format
Meaning
Transfer completed free of errors
Other error message from the e-mail server
Apart from the leading "8", the status corresponds to the three-digit error number of the
SMTP protocol.
No channel available
Possible cause: There is already an e-mail connection via the CP. A second connection
cannot be set up at the same time.
No TCP/IP connection could be established to the SMTP server.
The SMTP server has denied the login request.
An internal SSL error or a problem with the structure of the certificate was detected by the
SMTP client.
Request to use SSL was denied.
The client could not obtain a socket for creating a TCP/IP connection to the mail server.
It is not possible to write via the connection. Possible cause: The communications partner
reset the connection or the connection aborted.
It is not possible to read via the connection. Possible cause: The communications partner
terminated the connection or the connection was aborted.
Operating Instructions, 04/2017, C79000-G8976-C381-03
CP 1243-7 LTE