Siemens CP 1243-7 LTE Operating Instructions Manual page 4

Preface
Abbreviations/acronyms
● CP / submodule / module
Simplified designation of the CP 1243-7 LTE-EU / CP 1243-7 LTE-USCP 1243-7 LTE-EU
/ CP 1243-7 LTE-US
● TCSB
TeleControl Server Basic V3, OPC server for telecontrol communication
● Mobile wireless network
The mobile wireless network(s) that support or use the relevant CP.
The precise standards and frequency bands which the two CPs support can be found in
the sections Connecting the S7-1200 to a mobile wireless network (Page 11) and
Technical specifications (Page 133).
Purpose of the manual
This manual describes the properties of these modules and supports you when installing and
commissioning the device.
The necessary configuration steps are described in the form of an overview.
You will also find instructions for operation and information about the diagnostics options of
the device.
New in this issue
● New hardware product version 2
● New functions in the firmware version named above include:
– Sending messages even without telecontrol communication
– Changed behavior during time-of-day synchronization, see section Time-of-day
– Extended diagnostic functions
● Functional improvement of data point configuration as of STEP 7 V14 SP1. see section
Data point configuration (Page 76).
● Editorial revision
Replaced manual issue
Edition 05/2016
Current manual release on the Internet
You will also find the current version of this manual on the Internet pages of Siemens
Industry Online Support at the following address:
Link: (https://support.industry.siemens.com/cs/ww/en/ps/15924/man)
4
synchronization (Page 47).
Operating Instructions, 04/2017, C79000-G8976-C381-03
CP 1243-7 LTE