Husqvarna Automower 105 Operator's Manual page 37

Message Cause
Stuck in charging sta- There is an object in the way of the robotic
tion lawnmower preventing it from leaving the
charging station.
Upside down
The robotic lawnmower is leaning too much
or has turned over.
Needs manual charg-
The robotic lawnmower is set in the
ing
erating mode.
Next start hh:mm
The timer setting prevents the robotic lawn-
mower from operating.
The rest period is in progress. The robotic
lawnmower has an inbuilt standby period ac-
cording to the Standby time table.
The day's mowing is
The rest period is in progress. The robotic
complete
lawnmower has an inbuilt standby period ac-
cording to the Standby time table.
Lifted
The lift sensor has been activated as the
mower has become trapped.
Collision sensor prob-
Mower body can not move freely around its
lem, front/rear
chassis.
Wheel drive problem,
Grass or other object is wrapped around the
right/left drive wheel.
Alarm! Mower switch-
The alarm was activated because the mower
ed off
was switched OFF.
Alarm! Mower stop-
The alarm was activated because the mower
ped
was stopped.
Alarm! Mower lifted
The alarm was activated because the mower
was lifted.
Alarm! Mower tilted
The alarm was activated because the mower
was tilted.
Temporary battery
Temporary battery or software related issue
problem
in the mower.
Charging current too Wrong or faulty power supply unit.
high
136 - 003 -
Action
Remove the object.
Turn the robotic lawnmower the right way up.
MAN op-
Place the robotic lawnmower in the charging
station. This behaviour is normal and no ac-
tion is required.
Change the timer settings. See
page 21 .
This behaviour is normal and no action is re-
Standby on page 31 .
quired. See
This behaviour is normal and no action is re-
Standby on page 31 .
quired. See
Free the mower.
Check that the mower body can move freely
around its chassis.
Clean the wheels and around the wheels.
Adjust the mower security level in the Securi-
ty menu.
Restart the mower. Disconnect and reconnect
the battery.
The message may require action by author-
ized service technician.
Timer on
Troubleshooting - 37