Symptoms - Husqvarna Automower 105 Operator's Manual

6.4 Symptoms

If your robotic lawnmower does not work as expected, follow the symptoms guide below.
There is a FAQ (Frequently Asked Questions) on www.husqvarna.com which provides more detailed answers to a
number of standard questions. Contact your local Husqvarna representative if you still cannot find the reason for the
fault.
Symptoms Cause
The robotic lawnmow- The robotic lawnmower clock needs to be set. Set the clock. See
er runs at the wrong
The start and stop times for mowing are in-
time
correct.
The robotic lawnmow- The robotic lawnmower searches for the
er runs, but the blade charging station.
disc does not rotate.
Both the mowing and The battery is spent.
charging times are
shorter than usual.
The robotic lawnmow- Grass or other foreign object blocks the blade
er mows for shorter disc.
periods than usual
The battery is spent.
between charges.
The robotic lawnmow- The boundary wire is not laid in a long
er has difficulty dock- straight line that is far enough out from the
ing. charging station.
The guide wire is not inserted in the slot un-
der the charging station.
The charging station is on a slope.
The robotic lawnmow- The robotic lawnmower has an inbuilt standby
er is parked for hours period according to the Standby time table.
in the charging sta- See
tion.
The hatch has been closed without the
START button first being pressed.
136 - 003 -
Standby on page 31 .
Action
Time & Date on page 25 .
Reset the start time and stop time settings for
Time & Date on page 25 .
mowing. See
No action. The blade disc does not rotate
when the robotic lawnmower is searching for
the charging station.
Replace the battery. See
Remove and clean the blade disc. See
the robotic lawnmower on page 33 .
Replace the battery. See
Check that the charging station has been in-
stalled according to the instructions in
the boundary wire on page 16
It is absolutely critical for operation that the
guide wire is perfectly straight and is in the
correct position under the charging station.
Therefore make sure that the guide wire is al-
ways in its slot in the charging station. See
Laying and connecting the guide wire on
page 18 .
Place the charging station on a surface that is
Charging station on page
entirely level. See
11 .
No action.
Open the hatch, press the START button and
then close the hatch.
Battery on page 34 .
Clean
Battery on page 34 .
Laying
Troubleshooting - 39