Escape Sequence Descriptions - Honeywell 6824 User Manual

Escape Sequence Descriptions

Escape Sequences and Descriptions
ESC
ESC SO
ESC SI
ESC US (0)
ESC US (1)
ESC SP n
ESC "!" n
ESC "$" n1 n2
ESC "%" (0)
ESC "%" (1)
ESC "&" NUL k1 k2 s1 d1 ...
d11
ESC "*" m n1 n2
ESC "+" n d1 ... dn
ESC "-" 0*
ESC "-" 1*
ESC "/" c
ESC "0"
ESC "1"
ESC "2"
ESC "3" n
ESC "4"
ESC "5"
ESC "6"
ESC "7"
ESC "<"
ESC ":" NUL NUL NUL
ESC "?" s n
ESC "@"
6824 Mobile Full Page Printer User Manual
•
Once the last page of the fanfold paper stack is in the printer, and the
printhead has advanced past this Paper End Detection line, printing is no
longer reliable.
•
When the bottom end of the last page has advanced through the printer, past
the spring plate along the front of the platen, the paper should not reverse
back through the printer, because the printer could jam and cause paper feed
problems.
This section lists the supported escape sequences and includes a brief
description of each.
Description
Select double-wide mode (one line only)
Select compressed mode
Select top-down printing
Select bottom-up printing
Define intercharacter space
Master select
Set print position (absolute)
Select default character set
Select user-defined character set
Define user-defined characters
Select graphics mode
Print character graphics
Cancel underline mode
Select underline mode
Select vertical tab channel
Select 1/8-inch line spacing
Select 7/72-inch line spacing
Select 1/6-inch line spacing
Select n/216-inch line spacing
Select italic mode
Cancel italic mode
Enable printing of codes 128–159
Disable printing of codes 128–159
Select unidirectional printing (one line only)
Copy ROM to RAM
Reassign graphics mode
Perform master reset
Appendix A – Specifications and Command Lists
55