Sd Card Setting; Network Setting - JVC CA-NXBD3 Instruction

SD CARD SETTING

You can specify the SD card settings when the SD
card is inserting.
1
Press [SET UP].
2
Use [H / I] and [ENTER] to control
the preference screen.
• Proceed according to the procedure described
on the TV screen.
Items Contents (
BD-VIDEO DATA Yes
ERASE
No
FORMAT SD Yes
CARD
No
• Refer to "Virtual Package" on page 15 in addition to
the instructions on this page.
BD Video DATA ERASE
You can erase BD Video data from the SD card as
follows.
Select "BD-VIDEO DATA ERASE" using
[J / K] then press [ENTER].
SD CARD SETTING
BD-VIDEO DATA ERASE
FORMAT SD CARD
BD-VIDEO DATA ERASE
When BD-Video data is erased, all BD-Video
data on the SD Card is erased.
Are you sure to erase it?
Yes
EXIT
SELECT
SET UP
FORMAT SD CARD
You can format the SD card as follows.
Select "FORMAT SD CARD" using [J /
K] then press [ENTER].
SD CARD SETTING
BD-VIDEO DATA ERASE
FORMAT SD CARD
FORMAT SD CARD
The card's content will be erased !
Do you want to start formatted ?
Yes
EXIT
SELECT
SET UP
55
: initial setting)
No
ENTER
RETURN
No
ENTER
RETURN

NETWORK SETTING

You can specify the network settings when the disc is
stopped or when the SD card function is disabled.
1
Press [SET UP].
2
Use [H / I] and [ENTER] to control
the preference screen.
• Proceed according to the procedure described
on the TV screen.
Items Contents (
OBTAIN IP
DHCP
STATIC IP
STATIC IP
***.***.***.***
ADDRESS
STATIC
***.***.***.***
SUBNET MASK
DEFAULT
***.***.***.***
GATEWAY
CONNECTION Testing in progress
TEST
• Refer to the separate volume of the operation
manual for the network function.
NOTE
When changing the Internet connection environment
by using a DHCP router or other devices that assign
IP addresses automatically, select "DHCP" for
"OBTAIN IP".
: initial setting)