Siemens SINUMERIK 840D sl Operating Manual page 293

12. Positions
13. Milling the circular pocket
Milling
Operating Manual, 03/2013, 6FC5398-7CP40-3BA1
1. Press the "Drilling", "Positions" and "Drilling Positions" softkeys.
The "Any Positions" input window opens.
2. Enter the following parameters:
Z0
X2
Y2
X3
Y3
3. Press the "Accept" softkey.
1. Press the "Milling", "Pocket" and "Circular pocket" softkeys.
The "Circular Pocket" input window opens.
2. Enter the following technology parameters:
T End_mill_8mm
3. Enter the following parameters:
Machining
Machining type
Machining position
X0
Y0
Z0
Diameter
Z1
DXY
DZ
Creating a ShopMill program
7.17 Example, standard machining
Rectangular
-10abs
165abs
165abs
15abs
165abs
D1 F 0.018 mm/tooth
Roughing (∇)
Plane-by-plane
Single position
85abs
135abs
-10abs
30
12inc
40%
5
V 230 m/min
293