Displaying All Tool Details - Siemens SINUMERIK 840D sl Operating Manual

Tool management

11.14 Displaying all tool details

11.14 Displaying all tool details
All of the selected tool parameters are displayed in the "Tool Details - All Parameters"
window.
The parameters are displayed, sorted according to the following criteria:
● Tool data
● Cutting edge data
● Monitoring data
Protection level
You require access level, keyswitch 3 (protection level 4) in order to edit the parameters in
the detail window.
Procedure
...
566
Machine manufacturer
Please refer to the machine manufacturer's specifications.
1. The tool list, the wear list, the OEM tool list or the magazine is open.
2. Position the cursor to the desired tool.
3. If you are in the tool list or in the magazine, press the ">>" and "Details"
softkeys.
- OR -
If you are in the wear list or OEM tool list, press the "Details" softkey.
4. Press the "Additional details" softkey.
The "Tool Details - All Parameters" window opens.
All of the tool parameters are displayed in the list.
5. Use the scroll bar to display all the parameters in the list.
- OR -
Operating Manual, 03/2013, 6FC5398-7CP40-3BA1
Milling