Introduction
1.4 User interface
Start-up operating area
1.4.14
Online help in SINUMERIK Operate
A comprehensive context-sensitive online help is stored in the control system.
● A brief description is provided for each window and, if required, step-by-step instructions
● A detailed help is provided in the editor for every entered G code. You can also display all
● A help page with all parameters is provided on the input screen in the cycle programming.
● Lists of the machine data
● Lists of the setting data
● Lists of the drive parameters
● List of all alarms
54
for the operating sequences.
G functions and take over a selected command directly from the help into the editor.
Protection levels
Keyswitch 3
(protection level 4)
Keyswitch 3
(protection level 4)
Service
(protection level 2)
End user
(protection level 3)
End user
(protection level 3)
Operating Manual, 03/2013, 6FC5398-7CP40-3BA1
Milling