Table of Contents
Advertisement
WIT-300H User Manual
Issue: 0.4C
Date: 24/May/2005
Setting 802.11b Configuration.
You can configure 802.11b configuration such as SSID, Data rate, Encryption (WEP 64/128 bits)
AP Probing
WIT-300H searches all the reacheable APs. To detect the APs, just select "Auto" in SSID item in "Setting
802.11b Configuration" menu. WIT-300H shows the list of SSIDs configured in the APs. User can select
one of them with his preference. After selecting an AP, please reboot WIT-300H.
Note:
1. AP probing list can be shown maximum 5 APs
2. If you can not find a AP that you want to set, you press [Clear/Prev] and try it again until you find the
AP.
6.5.5
KTU Setting
Remote Mode / Same Router.
These menus are all related to the MFIM configuration. For normal interaction with MFIM in iPECS
system, WIT-300H should be configured like one of the LIP phones. About detail descriptions about Direct
Send/Remote Mode/Same Router, please refer to the configuration manual of LIP phones.
Direct Send
WIT-300H can automatically discover MFIM if this value is entered as FALSE. Even if a user do not know
MFIM IP address, the user can register to the MFIM by setting this value as FALSE. And even if there are
more than one MFIM in same IP subnet, a user can selectively register to a MFIM by setting this value as
TRUE.
46
This Document Contains proprietary information and may not be reproduced or copied without express
Written permission of a duly authorized representative of LG Electronics company
Advertisement
Table of Contents
