Table of Contents
Advertisement
WIT-300H User Manual
Issue: 0.4C
Parking Location Number
SYSTEM
PARKING LOCATION NUMBER
IPECS
601 – 610 for MFIM, 601-619 for MFIME
Notes : A Parking Location Area will be changed by LG
Condition
1. Call Park is only applied to a user that is in talk status.
2. Call Park is only applied to a parking location area.
3. A parked number will be displayed on the LCD after timer LDK sends release command.
(Display the LCD message come from IPECS)
4. WIP-Phone goes Idle state after receiving the RTI command.
5. Parked call will recall after time out.
2.2.8
Call Pick-Up
Description
This function is to pick up a call instead of another user who is called.
the IPECS attendant station.
Operation
Group Call Pick-up
A station can answer ("Pick-up") incoming and transferred Intercom, CO and IP calls ringing at another
station in the same Station Pick-up Group. All ringing calls except for Private Lines and queue callbacks
are subject to Pick-up by other group member stations.
In addition stations in other types of Station Groups, if allowed, may use Group Call Pick-up.
5. Dial the Group Call Pick-up access code 566.
6. Press [ Send ](
Note :
1) A station should be in the same pick-up group with the ringing station.
2) This feature should be programmed at the Admin. station before using.
(See the pick-up function programming method at the IPECS programming manual.)
Directed Call Pick-up
A station may answer ("Pick-up") incoming and transferred Intercom, CO and IP calls ringing at another
station. All ringing calls are subject to Directed Call Pick-up except Private Line and Queue Callbacks.
1. Dial the Directed Call Pick-up access code 7.
This Document Contains proprietary information and may not be reproduced or copied without express
Written permission of a duly authorized representative of LG Electronics company
)
28
Date: 24/May/2005
It can be used after programming at
Advertisement
Table of Contents
