Power-On; Power-Off; Initial Setup - Panasonic AG-HMX100P Operating Instructions Manual

Power-On

1
Use the supplied power cord to connect this unit to an AC power source.
2
Press the POWER button.
To specify the initial state of the unit when it is restarted
Preset mode: The last settings are restored when the unit is restarted. The factory default setting is this mode.
Reset mode:
previous state including those of the [SETUP] menu.
Factory default mode: The factory default settings are restored when the unit is restarted.

Power-Off

Initial Setup

the [SETUP] menu (
Setting the startup mode ( 
Changing direct patterns ( 
Setting video and audio input sources ( 
Setting the video format ( 
Setting the bus ( 
Setting the audio output channels ( 
Setting the audio fader ( 
Outputting the color bars ( 
Setting still pictures or movies ( 
Setting video created on PC ( 
HD/SD Settings
same time to perform the mixing operation.
To set the system format to HD:
To set the system format to SD:




19