Panasonic AG-HMX100P Operating Instructions Manual page 28

To set the audio output format and the operation of audio faders
The following table shows the output method and audio input sources assigned to the faders for each setting.
Setting Output Method
Sound output of the
selected input source
BUS SEP1
BUS SEP2 When AB bus
system is selected
Preset system is
selected
Fixed to sound of
input sources 1 and 2.
12 SEPA.
To set the operation of AUX and MIC
faders
rotary 3 control. The operation of each fader varies with the
setting as described in the table shown below.
Setting AUX fader
SEPA.
* To adjust the audio level of the microphone, operate the
1
28
SOURCE 1/5 Fader SOURCE 2/6 Fader
source source
L channel of A bus source
Preview button lighted: L
L channel of source 1
MIC fader
MIC input source
1 1
SOURCE 3/7 Fader
source
L channel of B bus source
Preview button lighted: L
Not available
L channel of source 2
[INT VIDEO] Menu
(Internal Video Setting) Screen
menu screen appears as shown below.
This menu is used to set the internal video signal built in
this unit.
The color set from this menu is indicated in the internal
video display area.
WASH P 128 P 128
B R
Y 196
EVENT ME TIME
00 1:00
E F
INT VIDEO
BACK COLOR LEVEL
MATTE WHITE
COLOR
BAR
MEMORY PAGE FRAME
1
* # stands for a numeric value. (The maximum value varies
1
SOURCE 4/8 Fader
source
Not available
WHT
YELW
CYAN
GREN
MGT
RED
BLUE
BLK
CST 1
CST 2
CL BR
ST # *
1
MV # *
1
PATTERN INT
3001 BLUE
GRADE POS 80
PATTERN GRADE
255 H1 0
MODE
2 FRAME WRITE