Setting Screen - Panasonic AG-HMX100P Operating Instructions Manual

Setting Screen

The following shows the basic configuration of the setting screen.
4 5
1 Joystick, rotary Z control settings, and 3D display
area
P , P , and C GAIN values during color setting.
B R
displayed.
2 Audio level meter
Indicates the audio output level.
3 Error Message
An error message appears in the following cases.
Message Condition and Action
FAN STOP The fan has stopped from any cause.
Immediately turn off the power and
request a service call (
than the system formats (
available for this unit is being
connected to this unit.
CHANGE HDMI FORMAT: Input
connectors are in unavailable
formats.
CHANGE HDMI1 FORMAT:
connector is in unavailable format.
CHANGE HDMI2 FORMAT:
connector is in unavailable format.
Change the system format setting or
the input source setting.
20
1
POS. X 128 Y 128
Z 196
EVENT ME TIME
00 2:00
E
VIDEO EFFECTS
MOSAIC
OFF
DEFOCUS LEVEL
OFF
MONO
OFF

2
FAN STOP
PATTERN INT
3044 WHT
F
CH A
SIZE
XY 0
0
6
 NOTE
The "FAN STOP" error message is also displayed on the
multi-view screen. However, since the multi-view screen
does not open when this unit is in 3D mode ( page
Vol.2-25), no error message is displayed even if the fan
stops. Pay attention to a message which will appear on the
LCD.
If two types of errors occur at the same time, "FAN STOP"
is displayed preferentially.
4 Event number, transition time, pattern number, and
internal video display area
EVENT: Shows the event number (
ME TIME: Shows the setting value of transition time
(

during fade setting (
To change the TIME type, press the applicable
turn on.
PATTERN: Shows the number of the currently selected
pattern (
INT: Shows the type of the currently selected internal
5 Menu title, related information, rotary 1 to 5
parameter display area
Shows the title of the currently selected menu
(
setting positions of rotary 1 to 5 controls.
3
