Sitrans Lr 400; Dimensions - Siemens sitrans LR 400 Instruction Manual And Users Manual

Dimensions

SITRANS LR 400 Version for Liquids (without Temperature Extension)
connection
cover
electronics
cover
intermediate
flange
threaded
ring
process
flange*
horn
Note:
Process temperature and pressure capabilities are dependent upon
information on the process device tag. See Appendix IV (Process Pressure/
Temperature de-Rating). Reference drawing listed on the tag is available upon
request.
WARNING:
gasket materials which will fall within the limits of the flange and its
intended use and which are suitable for the service conditions.
*Flange acc. to DIN 2527 / ANSI B16.5 / JIS B2238 bolt hole pattern
**An optional purging system can be installed between the flange and the horn antenna.
The system provides a 1/8" NPT inlet on the flange where cooling air or cleaning fluid
passes through the universal flange and exits the inside of the horn to clean it. The
customer will supply the purging medium by manual or automatic valve system. This
option is only available with universal flanges.
7ML19985FH04
204 mm
(8.0")
281 mm
SITRANS LR 4 00
(11.1")**
191 mm
(7.5")
74 mm
(2.9")
93 mm
(3.7")
The user is responsible for the selection of bolting and
SITRANS LR 400 – INSTRUCTION MANUAL
238 mm
(9.4")
earth
terminal
Page 11