Sharp SB-29S Service Manual page 8

1. Remove the drain tray ass'y from the panel-B.
2. Remove 2 screws holding the top plate.
3. Separate out the top plate from the unit.
4. Remove 4 screws holding the faucet cover and detach the faucet cover.
5. Remove 2 screws holding the faucet ass'y.
6. Push the push button and insert the jig into the faucet ass'y (Hot water), push up the jig and remove the
lever faucet from the faucet body. Lift up the lever faucet of faucet ass'y (Cool water) to front.
Faucet ass'y (Hot water)
Push button
Push
Faucet body
Push up
7. Remove 4 screws holding the panel B-A and separate from the unit.
8. Release 2 faucet from the panel-B and remove the panel-A and panel-B from the stand.
9. Remove 2 screws holding the PCB Hot display and PCB Cool display from the panel-B.
10. Remove 2 screws holding the panel-A and panel-B.
11. Now the panel B-A and faucet ass'y are free.
Faucet mounting plate
Faucet ass'y (Hot water)
Faucet cover
Screw
Faucet ass'y (Cool water)
Drain tray ass'y
REMOVE OF PANEL B-A AND FAUCET ASS'Y
Lever faucet
Jig
Connector pipe
PCB Cool display
PCB Hot display
Screw
Screw
Screw
Panel-A
Faucet ass'y (Cool water)
Lever faucet
Fig. 5
Cord band
Screw
Hot water
outlet tube
Cool water
outlet tube
Panel-B
Fig. 6
8
Lift up
Panel-B
Faucet body
Top plate
Screw