Add/Delete Rf Keyfob - Bosch Solution 2000 Installation Manual

Control Panel
4.
Delete RF Repeater
1.
2.
3.
Example:
To delete existing RF Repeater 8: Enter your installer code and press [0] [#] [8] [2] [9] [#] [*].
7.1.3

Add/Delete RF Keyfob

Notice!
Use Master Code to add/delete the RF keyfobs.
7.1.3.1
More than 3 heading levels are not supported! Using an ICON codepad
Add WE800EV2 Keyfob
Notice!
Learn all WE800EV2 keyfobs via WE800EV2 receiver Learn/Delete button before adding the
WE800EV2 keyfobs to the system. Refer WE800EV2 manual for learn/delete fobs.
Notice!
Set RF receiver as WE800EV2 Receiver (Value 2 in Location 395).
1.
2.
3.
4.
5.
Delete WE800EV2 Keyfob
1.
2.
3.
Bosch Security Systems, Inc.
– Or press [#] key to switch into auto mode. When icon numbers (1 to 16) flash,
tamper the RF Repeater. The panel learns the RF Repeater ID number and the last
digit of RFID number displays on the codepad. Press [#] key to confirm.
Enter [#] key to confirm the operation, or enter [*] to cancel.
Enter the Installer Code, followed by [0] and the [#] key.
Enter the point ID of RADION Repeater (822 to 829) you want to delete, followed by the
[#] key.
Press the [*] key to delete the RF Repeater.
Enter the Master Code, followed by [1] and the [#] key (for example, [25801#]).
Enter the WE800EV2 keyfob number (301 to 332) you want to add (301 = keyfob 1, 302 =
keyfob2, etc.), followed by the [#] key. Up to 21 WE800EV2 keyfobs can be added, but
only current keyfob number (1 to 16) displays through zone indicators on the ICON
codepad.
The user number will display on the codepad. Press [#] to continue.
When icon numbers (1 to 16) flash, press button 1 or 2 of the keyfob. The panel learns
the WE800EV2 Keyfob ID number and the last digit of RFID number displays on the
codepad. Press [#] key to confirm.
Enter [#] key to confirm the operation, or press [*] to cancel.
Enter the Master Code, followed by [1] and the [#] key.
Enter the WE800EV2 keyfob number (301 to 332) you want to delete, followed by the [#]
key.
Press the [*] key to delete the WE800EV2 Keyfob.
Installation Guide
System Functions | en 43
2017.10 | 03 | F.01U.298.026