Fujitsu AUYG07LVLA Design & Technical Manual page 250

1) Remote controller address setting
NOTE: Because this setting is normally done automatically when 2-wire-type wired remote con-
troller is installed, setting is unnecessary.
Multiple indoor units can be operated by using one wired remote controller.
Set the unit number of each indoor unit.
Function number
00
NOTES:
• When connecting Polar 3-core wired remote controller, set the remote controller address in
the order of 0, 1, 2, ....., and 15.
• When different type of indoor units (such as wall mounted type and cassette type, cassette
type and duct type, or other combinations) are connected using group control system, some
functions may no longer be available.
2) Filter sign
Select appropriate intervals for displaying the filter sign on the indoor unit according to the esti-
mated amount of dust in the air of the room.
If the indication is not required, select "No indication" (03).
Function number
11
Intervals will differ depending on the indoor unit type as follows.
Setting Compact
description cassette
Standard 2,500 hours
Long interval 4,400 hours
Short interval 1,250 hours
Setting value
00
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
Setting value
00
01
02
03
Slim duct
Mini duct
- 242 -
Setting description
Unit no. 0
Unit no. 1
Unit no. 2
Unit no. 3
Unit no. 4
Unit no. 5
Unit no. 6
Unit no. 7
Unit no. 8
Unit no. 9
Unit no. 10
Unit no. 11
Unit no. 12
Unit no. 13
Unit no. 14
Unit no. 15
Setting description
Standard
Long interval
Short interval
No indication
Wall mounted Floor
400 hours
1,000 hours
200 hours
Factory setting
♦
Factory setting
♦
Floor/Ceiling