Viewing Sensor Information - Dell iDRAC7 User Manual

• CPUs
• DIMMs
• HDDs
• Backplanes
• Network Interface Cards (integrated and embedded)
• Video card
• SD card
• Power Supply Units (PSUs)
• Fans
• Fibre Channel HBAs
• USB
The Firmware Inventory section displays the firmware version for the following components:
• BIOS
• Lifecycle Controller
• iDRAC
• OS driver pack
• 32-bit diagnostics
• System CPLD
• PERC controllers
• Batteries
• Physical disks
• Power supply
• NIC
• Fibre Channel
• Backplane
• Enclosure
• PCIe SSDs
When you replace any hardware component or update the firmware versions, make sure to enable and run the Collect
System Inventory on Reboot (CSIOR) option to collect the system inventory on reboot. After a few minutes, log in to
iDRAC7, and navigate to the System Inventory page to view the details. It may take up to five minutes for the information
to be available depending on the hardware installed on the server.
NOTE: CSIOR option is enabled by default.
Click Export to export the hardware inventory in an XML format and save it to a location of your choice.

Viewing Sensor Information

The following sensors help to monitor the health of the managed system:
• Batteries — Provides information about the batteries on the system board CMOS and storage RAID On Motherboard
(ROMB).
NOTE: The Storage ROMB battery settings are available only if the system has a ROMB with a battery.
• Fan (available only for rack and tower servers) — Provides information about the system fans —fan redundancy and
fans list that display fan speed and threshold values.
94