Install The Cable Management Tray - Dell SCv360 Owner's Manual

Figure 6. Mounting Location from Front and Back of Rack
1. Location for the clip nuts to secure the top cover
3. Location for the expansion enclosure rack rails

Install the Cable Management Tray

If you plan to use the 1U cable management tray, install the tray before installing the SCv360 expansion enclosure.
Prerequisite
Table 1. Identify the Hardware
Part
Screwdriver
Left rail
Right rail
Cable management tray
Cable management
chain
Chassis bracket
Front bezel
Optional
14
SCv360 Expansion Enclosure Installation
Part Number
034-000-193
042-034-012
042-034-008
042-033-060
150-000-168
043-043-023
100-563-123
036-034-012
036-034-003
036-034-004
2. Location for the clip nuts to secure the expansion
enclosure
4. Location for the 1U cable management tray rails
Description
6-in-1 screwdriver (Quantity: 1)
Left rail for the cable management tray (Quantity: 1)
Right rail for the cable management tray (Quantity: 1)
1U cable management tray (Quantity: 1)
Chains for managing cables (Quantity: 2)
Bracket that secures the cable management chains to the chassis (Quantity:
1)
Bezel for the front of the cable management tray (Quantity: 1)
#8-32 x 3/4 in. Phillips screw (Quantity: 5)
Used to secure the cable management tray rails to a rack, regardless of the
rack type
Square hole alignment pin (Quantity: 9)
Replacement alignment pin used to mount tray rails in racks that have 0.375
in. square holes
Threaded hole alignment pin (Quantity: 9)
Replacement alignment pin used to mount tray rails in racks that have
threaded holes