Dell SCv360 Owner's Manual page 49

Figure 53. Open the Cable Chain Latches
8. Remove the cables from the cable chains and remove the cable chains from the 1U cable management tray.
9. At the front of the 1U cable management tray, push up on the spring clips to release the tray.
Figure 54. Release Tray Using the Spring Clips
10. Pull the 1U cable management tray towards the front of the rack until it is free from the rails.
Figure 55. Remove Tray from the Rails
11. Remove the 8-32 x 0.75 in. screws from the front and back of the rails.
12. Pull back on the rails until the adaptors clear the front of the rack holes.
13. Remove the rails from the rack.
Replacing SCv360 Expansion Enclosure Components
49