Table of Contents
Advertisement
d. Press the tab into the slot until you hear a click.
The click indicates that the arm is secure.
Figure 75. Swing Upper Arm to Right Side of Chassis and Secure Lower Arm
e. Align the securing tab on the left end of the upper arm with the notch over the orange release tab.
f. Press the tab into the slot until you hear a click.
The click indicates that the arm is secure.
Figure 76. Secure Cable Management Arm
8.
Verify that the cable management arms are attached at the securing tabs.
60
Replacing SCv360 Expansion Enclosure Components
Advertisement
Table of Contents
