Getting Started; Fitting Batteries; Switching On - GE Druck DPI 610 User Manual

Getting Started

Fitting Batteries

Manufacturer Type No.
Energizer Industrial Type EN93
Energizer Type E93.LR14.C.AM2
Duracell Type MN1400-LR14
Varta No.4014 Type LR14.C.AM2
Procell Industrial Type MN1400-LR14
3
TASK: BASIC
VOLTAGE
PRESSURE INT
CURRENT PRESSURE
UNITS
WARNING: BATTERIES MUST ONLY BE FITTED IN A SAFE AREA.
USE ONLY THE BATTERIES SPECIFIED IN THE TABLE.
Caution: Old batteries can leak and cause corrosion. Never leave discharged batteries in
the instrument. Old batteries should be treated as hazardous waste and
disposed of accordingly.

Switching On

Press the I/O switch on the front panel and proceed as follows:
The first time that the instrument is powered up, it will power-up in BASIC mode with the
main screen displaying voltage in the input display area and pressure in the source
display area. To switch to Current as input, press F1 as shown. Similarly, F1 to return to
Voltage.
Note: No other keys are active in this mode and the instrument can only be reconfigured
by pressing the TASK key and selecting another mode.
1 Cover fixing
screws.
2 Six alkaline C
- +
cells, see table.
Only use the
battery type in
V
the table.
3 Low battery
bar
indication.
1
2
7 K0430 Issue No. 2