Table of Contents
Advertisement
Chapter 2
Installation Procedures
This chapter provides procedures for installing a D2246 disk drive. When preparing the
installation site, refer to the environmental specifications listed in Appendix B.
2.1 UNPACKINGIREPACKING
Before unpacking the disk drive, examine the shipping carton for damage. If damage has
occurred, notify the carrier immediately. Do not open the carton until the carrier's
representative is present.
If there is no damage to the shipping carton, use these procedures to unpack the disk
drive. Failure to follow these procedures can void the product warranty.
1. Open the top of the shipping carton.
2. Remove the top packing brace (see Figure 2-1).
3. Carefully remove the disk drive from the shipping carton.
4. Remove the D2246 from the plastic shipping bag.
5. Save all packing material for reshipping.
6. Check all items against the bill of material to insure that no items are missing.
7. Check all items for shipping damage.
To repack the disk drive, reverse these procedures.
TOP PACKING BRACE
02246 DISK DRIVE
SHIPPING CARTON
Figure 2-1 D2246 Packaging
2-1
Advertisement
Table of Contents
