5.9
Transfer
By pressing <F4> (TRANSFER) in the basic display you branch tothetransfer display.
In this branch of the program you can transfer machine data or machining programs from one
device to another.
I MAcHINE DATA
Device
Axis
Drive
File
name
P l a n t desig. :
Generated by :
Generated on :
Fig. 5/21 Transfer display
Description of the output fields
Following the start of the transfer, TRANSFER and either M A C H I N I N G P R O GRAM or
M A C H I N E DATA are entered in the header. The output fieids BLOCK and DEVICE are
completed with the appropriate values. The DB number of the data record to be transferred is dis-
played in BLOCK and the source device is entered in DEVICE.
DEVICE :~D— ~
Data block :
Source
—
TRANSFER
BLOCK :
D A T A
Target
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
HELP
–
: = output field
Transfer
—
EXIT
5-51