Overview; Monthly Maintenance Procedure; Million Impressions Maintenance Procedure - HP Indigo 5000 Preventive Maintenance Manual

Overview

The preventive maintenance schedule is based on monthly visits, which include performing
procedures based on the press impression counter according to the following schedule:

Monthly maintenance procedure

To be performed monthly, without regard to the impression counter. The following parts will be
replaced only if 1 million impressions were made since the last replacement:
• Carbon filters
• Cleaning station sponge roller
• Suction cups

2 million impressions maintenance procedure

To be performed when the press has printed 2 million or more impressions since the last 2 million
impression procedure was performed. The 2 million impression procedure is performed in addition to
the monthly impression procedure.
These maintenance routines are complementary to the operator routines, and do not replace them.
The operator will continue the press maintenance on a daily and weekly basis. Check that the press is
properly maintained by the operator. If there are signs of negligence, report back to your regional
manager.
The following 2 million impression kit is available: CA290-00960.
Before every visit, verify that you have all the necessary parts. For your convenience, a short list is
provided on page 12.
Note that some of the parts are included as 'conditional' - subject to replacement, if needed, following
inspection. Order and replace if needed.
CA294-00570
2 Million Imp - Preventive Maintenance Guide - HP Indigo press 5000
rev 01 page 2 of 18