Monthly Maintenance - HP Indigo 5000 Preventive Maintenance Manual

Monthly maintenance

Date:
HP Indigo press 5000 S/N:
Customer name:
Required parts
General inspection
Config save
Ink unit
ITM Drum
CA294-00570
2 Million Imp - Preventive Maintenance Guide - HP Indigo press 5000
Time spent:
Service person:
Country/State:
Complete CE kit. See page 12.
Check for external dirt, leakage and signs of improper
maintenance. Initiate a service call if there is a
leakage problem.
Verify that daily and weekly operator routines have
been performed correctly. See the latest User Guide.
Verify that all lubrication points have been oiled and
greased properly. See the latest User Guide.
Inform your regional manager if the press is not
properly maintained.
Perform Config save to update the customer diskette.
Calibrate the density sensors.
Calibrate the ink conductivity sensors.
Calibrate the ink flow rate.
Clean ITM slip ring (the bias contacts path) using IPA.
Clean the ITM thermostat slip ring.
Verify the temperature sensor reading, and calibrate,
if required.
Make sure that the surface facing the IR sensor is
clean.
Inspect and thoroughly clean the ITM hood wire mesh
filter on the rear wall using IPA soaked cloth.
Caution: Shut down the press before removing the
mesh.
rev 01 page 3 of 18