Fujitsu PRIMERGY CX400 M4 Operating Manual page 44

Hardware installation
When using a lifter, this installation procedure needs to be carried out by
maintenance personnel.
I
At least two people are needed to position the server on the rack rails.
Figure 11: Mounting the server enclosure into the rack (A).
Ê Set the back-end of both inner rails (1) into the front entry of the both outer
rails (2).
Figure 12: Mounting the server enclosure into the rack (A)
Ê Push the server enclosure as far as possible into the rack.
44
1
Operating Manual
2
CX400 M4